Disclaimer: This is an example of a student written essay.
Click here for sample essays written by our professional writers.

Any scientific information contained within this essay should not be treated as fact, this content is to be used for educational purposes only and may contain factual inaccuracies or be out of date.

Factors Impacting UK Winter Wheat Crops

Paper Type: Free Essay Subject: Environmental Studies
Wordcount: 5397 words Published: 4th Sep 2017

Reference this

Summary

Wheat is one of the main important cereal crops in the world. Also as one of the essential and important agricultural products. Wheat is considered as a strategic product due to its significant role in political and economic areas in the countries.

Loss of wheat may harm the economy in several aspects, including reduced production rates, increased need for imports and waste the inputs required for the production (Fallah and Rasouliazar, 2016).

In the UK average yields of winter wheat have increased progressively from the 1950s to the present a rate of approximately 100 kg ha-1 yr-1. Until the late 1980s, the increase was attributed about half to plant breeding and the half to husbandry. (Shearman et al., 2005) Any action was taken to improve the quantity and quality of the wheat would be of great importance.

Many factors came together for increasing yield of a winter wheat crop in the UK. Including plant establishment, rotation management, nutrient management, disease, pest and weed control, and soil management. Each factor can affect or limit yield performance. In this research, we investigate factors that influence winter wheat crops and which will improve yield performance.

Introduction

Cereal crops are a major staple food worldwide, contributing more than 50% of total human calorie input directly. In the last twenty years, the annual increment in the average yields of UK wheat and oilseed rape increased slightly. In the second half of the 20th-century cereal yields for example wheat, in the worldwide from 1 to 3 t ha−1and in the UK approximately less than three t ha−1 increased (Fischer and Edmeades, 2010; Hawkesford et al., 2013. )

Get Help With Your Essay

If you need assistance with writing your essay, our professional essay writing service is here to help!

Essay Writing Service

Wheat is one of the important cereal crops in the world. Wheat is special in several ways for instance in human’s food, they are used to make flour for yeast bread, or are blended with soft spring wheat to make the all- purpose flour used in a wide variety of baked products and The highest grain yields are obtained with winter wheat.

In this research, we investigate factors affecting winter wheat crops, and Evaluate of them can lead us to adjust management to achieve a greater yield.

Crop Nutrition

Each plant needs a different range of nutrients at every critical stage of its development. Cereal crops use nutrients for growth, progressively moving them from the roots and stems into the ear before the dying off and harvesting of the grain. For example, Phosphorus (P) is a vital component of adenosine triphosphate (ATP) which supplies the energy for many processes in the plant. Magnesium (Mg) is also a key component of leaf chlorophyll and the enzymes that support plant growth. Zinc and Boron directly influence the growth and yield of cereals and other crops, especially during flowering (Ghaffar et al., 2011).

Wheat as an important source of minerals such as iron, zinc, copper and magnesium. The dietary intake of these nutrients have decreased significantly in recent years in the UK which corresponds with the introduction of semi-dwarf, high-yielding cultivars. (Ming-Sheng Fan et al., 2008)

Semi-dwarf and high-yielding crop cultivars were responsible for increasing inputs of fertilisers and other agrochemicals which increased grain yield, however, increase in agronomic yield led to lower density of minerals in grain. The hypothesis of Davis et al indicated that decline in the nutrients in crops is because of changing in crops to varieties with improved yield. Ming-Sheng Fan et al, in the result of their experiments they also indicated that “decreasing mineral concentrations in wheat grain are partly due to a “dilution” effect resulting from increased yield.

It appears changing cultivars was affecting the mineral concentration. This change is further supported by (Flintham et al., 1997) that as a conclusion of the introduction of short-straw cultivars, HI (harvest index) increased, however mineral concentration significantly decreased in grain.

The solution for helping minerals in grain is to add micronutrients. Supplementation, diversification of diet and bio-fortification of crops by agronomic or genetic methods such as plant breeding can increase the micronutrients; the genetic methods are considered to be the most efficient for resource-poor populations in developing countries (Graham et al., 1999; Bouis, 2002; Welch and Graham, 2004). In the germplasm of the main crops there is a sufficient genetic variation in micronutrient concentrations, which can be explored in breeding strategies to combine the high nutrient density with the high-yielding traits(Graham et al.,1999; Cakmak et al ., 2004) such as Triticum Oflococum, Triticum dicoccol, and Triticum dicoccoides (Cakmak et al.,1999a, 2000; Ortiz-Monasterio and Graham ,2000)

Among wild wheat germplasm, the emmer wheat, Triticum dicoccoides, showed the largest variation and the highest concentration of micronutrients (Cakmak et al., 2000).

Crop rotation

One of the most effective management methods to prevent the development of the large population of plant diseases is crop rotation. Crop rotation means the planned order of specific crops planted on the same field (Huber et al., 1965), for example soil-borne pathogens which cause soil-borne diseases that lead to reducing crop yields can be controlled with rotations with non-host crops. Also, rotation suppresses Take all disease, Cephaelosporium stripe, Cercosporella foot rot and Cercosporella herpotrichoides (Welch et al., 2004). However, this method is used for preventing and it cannot reduce the size of the population significantly, therefore it is better to view crop rotation as preventive rather than curative.

Different crop rotations may have different effects on different pathogens, for instance Meloidogyne incognita were reduced by crops of crotalaria, marigold or bahiagrass while the population of Trichodorus christei were increased (Murphy et al.,1974), so it is vital to understand plant disease before planting crops.

Crop Rotation benefits are = Maintains soil fertility.

Reduces soil erosion.

Controls pests, disease and weeds

Reduces reliance on synthetic chemicals.

There are two major limits for crop rotation, the first one is some pathogens have many host ranges so it may be difficult to identify them, for example Rhizoctonia solani .The second one is that non-host crops may have little monetary value, so the selection of crops to use for rotation may be small. (Battese and Fuller, 1972) and if crops rotation not chosen properly, have chances of competition between the crops for nutrients.

Establishment management

One of the most important factors that can provide the correct condition for both growing and crop establishment is tillage. Tillage is accomplished to optimise productivity by alleviating physical, chemical and biological constraints of soil (Gajri et al., 2002).

Progressive tillage systems are developed to minimise cultivation costs and meet a range of variables such as soil or climate. It also improves the timeliness of planting which leads to an improved crop establishment. (Morris et al., 2010)

In the UK, current tillage systems can be divided into two general categories; Inversion tillage, known as conventional plough tillage, and Conservation tillage, known as non-inversion tillage.

Inversion tillage, inclusive of seed bed preparation by complete soil inversion, incorporates or buries most of the crop residue into the ground and consists of two processes: tillage and secondary tillage. Conservation tillage leaves the previous year’s crop residue (such as wheat) on fields before and after planting the next crop using the two processes of strip tillage and direct drilling to reduce soil degradation and achieve a sustainable balance between production (Carter et al., 2003a) (Davies and Finney,2002).

No-till, known as direct drilling or zero tillage, is a conventional tillage system which sows directly in previous crops without any prior loosening of the soil cultivation. (Soane et al., 2012). Ploughing system is a farm implement used in farming for initial cultivation of soil in preparation for sowing seed or planting to loosen or turn the soil.

Ploughing system can expose soil compacted at harvest, therefore when it is loosened by weather it increases mixing of nutrients which is beneficial. Ploughing reduces risk of crop disease, pests and weeds. In contrast, no-till increases area capability and reduces overall costs such as fuel and machinery (Soane et al., 2012). Other limited and benefit of ploughing and no-till present in table 1.

Table1. Agronomic advantages and disadvantages of No-till and ploughing

No-till

Ploughing

Advantages

Disadvantages

Advantages

Disadvantages

Reduce run-off, soil erosion and cost.

Increase soil fertility.

Increase area capability

reduction of compaction below plough furrow

Not suitable for controlling weeds, pest.

Reduce grain’s yields.

crop residue Remain on the soil surface

Crop establishment problems during very wet and very dry.

reduced nitrogen availability for yield

Completely buries weeds and crop residue.

Increase mixing of nutrients when loosened by weather

Reduced weeds ,crop diseases and pest

Suitable for preparing a seedbed after grass.

High cost (fuel and machinery).

Increased CO 2 emission.

Extreme looseness to depth of ploughing.

High sensitivity to re-compaction of topsoil.

Pest management

Crop plants are attacked by many pests that affect plant survival, growth, and reproduction and as a result influence crop yield. Approximately 22% of the total area of wheat in the UK is affected by slugs without pesticides, Calculated that total annual cost to the UK industry from not controlling slugs in oilseed rape and wheat is approximately £43.5 million. (Nicholls, 2013).

Pests can cause crop-damaging by reducing rates of germination, feeding on seeds, roots, stem and leaves which reduce yields. In crop growth stages, pests can reduce yield potential of the harvest and Reduces crops ability to compensate for damage caused later in development and cause harm to crops near their harvest by reduces yield and quality. (Oerke, 2006; Damalas and Eleftherohorinos, 2011)

For example, two different aphid detriment in cereals crops in the UK because they transmit barley yellow dwarf luteovirus and Grain aphid Sitobion avenae. (Nicholls, 2013)

Despite these commonly acknowledged risks, pesticides do improve agricultural productivity. Pesticides can be considered as an economic, labor-saving, and efficient tool for pest management and can do improve agricultural productivity (Campbell,1976), such as Acetamiprid , Azadirachtin , Bifenthrin , Carbaryl for controlling insects but these benefits often go unnoticed by the general public.

Pesticides are widely used in the agricultural production hence, increasing amounts of pesticides must be applied at rising costs to maintain sufficient control. This increasing has led to integrated pest management (IPM) programs which reduce pest numbers to an acceptable threshold (Jain and Bhargava, 2007).

Push-pull strategies were conceived as a strategy for insect pest management (IPM) by Pyke et al. The push-pull technology is a strategy for controlling agricultural pests by using propulsive (push) while luring them toward an attractive source (pull) plants and trap them. This method can maximise the efficacy of behavior-manipulating stimuli through the additive and synergistic effects of integrating their use. Also can reduce pesticide input (Cook et al., 2006).

The other method that can effect on pests is no-till. It seems pest under no-till method decreases dramatically because of increased numbers of predators. For example, it reduces springtails (Onychiurus spp.) that cause damage in shoot and root of the sugar beet (Soane et al., 2012).However, the preservation of crop residues in wet conditions tends to increase slug population, and this can lead to damage to young seedlings in winter-sown Wheat and barley (Jordan et al., 1997).Using molluscicides may control slug population, but it will still increase production costs and affect beneficial soil biota (abid.)

Soil management

“Soil is the product of a complex set of interacting processes and cycles” (Fitzpatrick, 1991) Plants need a network of pore spaces to assistance gas exchange such as oxygen and carbon dioxide. Also water movement and nutrient uptake. Over time if the soil environment under intensive agricultural production was disturbed, the ability of the soil to maintain these conditions is compromised (Gerrard, 2000). So Preservation and improvement of soil quality are important in agricultural productivity and environmental quality.

Soil management practice which consideration all operations practices, and treatments used to protect the soil organic matter, soil structure, and the maintenance of a thriving soil microbial population. (Johnston and Fellow, 2005)

In central Great Plains, soil erosion and drought are the main problems associated with grain production. No- till is a good system for reducing soil erosion and maximise soil water conservation. (Fenster and Peterson, 1979)

In the UK using no-till after ploughing led to lower yields because of imperfect drainage and weak structure of soils during wet winter however all over the UK, good internal drainage was considered a pre-requisite for reliable success with no-till as discovered in the Germany (Ehlers and Claupein, 1994).

No-till, can also increase biological activity such as earthworms and improve stable root channels this can develop greater water permeability (Soane et al., 2012).

Under no-till, it seems, soil nutrients such as P and K increased dramatically near soil surface because of this microbiological activity. (Ehlers and Claupein, 1994). Also no-till it seems not suitable for sandy or drained soils. In Netherland, under the sandy soil, no-till decreased root penetration and yield such as root crop (Soane et al., 2012).

Weeds Management

Weeds have many attributes undesirable to crop producers and cause the adverse effect on their yield. There are limited reports on the inhibitory effects of weeds on crop plants (Bhowmik & Doll, 1992).Wheat (Triticum aestivum L.) is the most important cereal in the world. It has been estimated that globally yield reduction in wheat due to weeds is 13.1% (Oerke et al., 1994).

Weeds compete with the crop plants for sunlight, water, mineral nutrients and occupying a space, which would reduce the plant growth and this led to reducing crop yields, quality and harvesting efficiency. (Wright et al., 2001) Water requirement for the growth of weeds is primarily of interest from the standpoint of competition with the crop plant for the available moisture (Gibson, 2000).

Weeds provide a host for insects, nematodes and certain plant pathogens such as fungi. For instance Fusarium species pathogenic to winter wheat have been isolated from common broad-leaved weeds. (Jenkinson & Parry, 1994).

Weed management strategies attempt to eliminate or limit the deleterious effects of weeds when growing with crop plants and decrease weeds’ ability to reduce yield. (Hager et al., 2003)

The basic of all Weed control methods is prevention. In few years the concept of prevention is not relevant anymore because of the availability of effective herbicides and mechanical control measures. These controlling tools have led to control weeds even after they have become established. (Walker 1995).

Herbicides may influence disease development via direct effects on the pathogens (Rodriguez-Kabana et al. 1966) or by altering plant resistance to pathogens (Dann et al. 1999; Levene et al. 1998) for example Broad-leaved weeds in winter wheat can be controlled by herbicides applied before or after wheat emergence in autumn or in spring. In Table 2 we mentioned a few Common herbicides used to control weeds

In recent years using Herbicides for controlling weed decreased because using herbicides may damage the crop. Also can get mixed with air, water and soil and kill other unwanted plant pests.So we must use other methods for controlling weeds without much dependence on chemicals like fertilisers and herbicides which have unpredictable harmful effects on the environment and human health. ( Varshney et al., 2012)

Crop rotation is often identified as a valuable component of weed management for example Downy brome (Bromus tectorum L.) density remained relatively constant when winter wheat (Triticum aestivum L.) was rotated with oilseed rape (Blackshaw 1994a). (Abid.)

A cover crop is another method for managing weeds. They contribute organic matter to the soil, improve soil structure, and they can suppress weeds. Cover crops could permit reduction of herbicide inputs and a shift toward entire post-emergence herbicide programs for many crops. The early weed suppression provided by cover crop residue allow plants to become established before weed emergence. (Upadhyaya, and Blackshaw – 2007)

Table 2. Common herbicides used to control weeds.

Herbicide

Mode of action

Weeds controlled

Versatil

Simazine

Buster

Terbuthylazine

Absorbed by leaves, stems and roots.

Absorbed only through roots of germinating plants

Systemic contact herbicide (via the leaf)

Absorbed through roots and leaves

Controls thistles, yarrow, clovers and many difficult flat weeds

Prevents the emergence of a wide range of grasses and weeds.

Broadleaved weeds and clovers. Provides short-term weed control

Controls a wide range of annual and perennial grasses and weeds

Disease management

Wheat, it’s an important food resource which approximately contains 40% of the world’s population (Bockus, et al., 2010) annually global yield losses because of wheat diseases are estimated to be 20% in the field or the storage. (Abid.)

The disease can terminate entire trees in orchards or plantations Such as Phytophthora root or collar rot, and some can destroy before or after harvested product. For instance, the smuts, which destroy before or after the harvesting the cereal grains (all postharvest rots of fruits and vegetables) (James, 1974)

Each year in the UK the percentage of yield decreases because of disease diverse. The highest yield loss was between 1991, 1993 and 1998, and lowest was in 1995.Eyespot compared to other diseases caused greater yield losses. The second most significant disease was Powdery mildew in seven of the ten years but in 1990 demonstrate the greater losses than any other illness. The national economic impact of these yield losses varied depending on annual production figures and the price per tonne. (Hardwick et al., 2001) Each of these can infect wheat and cause disease throughout the growing season.

Find Out How UKEssays.com Can Help You!

Our academic experts are ready and waiting to assist with any writing project you may have. From simple essay plans, through to full dissertations, you can guarantee we have a service perfectly matched to your needs.

View our services

It is important to deliver consistently, high yields of high-quality grain thus controlling of cereal diseases is an important component of successful crop management. Recognition of the disease and an understanding of the pathogen’s purpose are the first step for a successful disease control. Therefore disease management is necessary. Many strategies, tactics and techniques in disease management used in advanced (prevention) which applied before infection for protecting plant from disease and after infection controlled by heat or chemical treatment as bulbs, corms and fungicide (OC Maloy ,2005)

Plant disease management is a factor that has positive and negative externalities on the yield. The adverse effect includes environmental pollution; toxin remains in the soil, ecological damage, resource depletion, reduced disease management efficiency and costs associated with meeting minimum chemical residues on crop harvest. And positive effects can benefits to disease management in neighbouring farms, can reduce evolutionary potential of pathogens, and ensure social stability and safety (HE et al., 2016)

Farmers only pay the direct costs associated with plant disease management; they strongly select strategies that generate the best immediate economic returns while largely discounting potential negative impacts on the environment. To date, some highly effective disease management strategies have been used without sufficient regard to their long-term ecological effects such as Fungicide.

Fungicide was used on more than 93% of crops throughout the word for about ten years. In 1996 and 1998, fungicide usage reached 98%.it seems farmers do not value disease resistance but apply fungicides widely. Disease-induced losses are still substantial, despite the heavy reliance on fungicides (Stevens et al., 1997). During the 10-year using Fungicide has increased but so have septoria leaf blotch and eyespot. It has been suggested that national disease levels and yield losses were influenced more by season than fungicide usage. (Hardwick et al. 2000).

Priestley & Bayles (1980)found, from a postal survey of NIAB Fellows, that disease was seen more frequently in fungicide-treated (such as benomyl, carbendazim) than in untreated fields. Cook & King (1984) indicated that final disease levels were often similar in treated and untreated crops.

For improving yield, it would be better for plant disease management to focus on increasing crop productivity, using fewer fungicides, reducing food contamination by microbial toxins, Change the philosophy of plant disease management to focus on pathogens (or insect vectors) to managing host plants for achieving high productivity yield and Considerations in agricultural productivity and crop health. (Problems, challenges and future of plant disease management: from an ecological point of view)

It is preferred that Plant disease management not only considers about biodegradable principles to reduce disease epidemics over plants practices it may also discuss how the strategies may impact on agricultural and ecological sustainability (HE et al., 2016).

References

Battese, G. E. and Fuller, W. A. 1972. Determination of economic optima from crop-rotation experiments. Biometrics, pp. 781-792.

Bhowmik, P. and Doll, J. 1982. Corn and soybean response to allelopathic effects of weed and crop residues. Agronomy Journal, 74 (4), pp. 601-606.

Bockus, W. W., Bowden, R., Hunger, R., Murray, T. and Smiley, R. 2010. Compendium of wheat diseases and pests. American Phytopathological Society (APS Press).

Bouis, H. E. 2002. Plant breeding: A new tool for fighting micronutrient malnutrition. The Journal of Nutrition, 132 (3), pp. 491S-494S.

Cakmak, I., Ozkan, H., Braun, H., Welch, R. and Romheld, V. 2000. Zinc and iron concentrations in seeds of wild, primitive, and modern wheats. Food and Nutrition Bulletin, 21 (4), pp. 401-403.

Cakmak, I., Tolay, I., Ozdemir, A., Ozkan, H., Ozturk, L. and Kling, C. 1999. Differences in zinc efficiency among and within diploid, tetraploid and hexaploid wheats. Annals of Botany, 84 (2), pp. 163-171.

Çakmak, Ä°., Torun, A., Millet, E., Feldman, M., Fahima, T., Korol, A., Nevo, E., Braun, H. and Ã-zkan, H. 2004. Triticum dicoccoides: An important genetic resource for increasing zinc and iron concentration in modern cultivated wheat. Soil Science and Plant Nutrition, 50 (7), pp. 1047-1054.

Campbell, H. F. 1976. Estimating the marginal productivity of agricultural pesticides: The case of Tree‐Fruit farms in the okanagan valley. Canadian Journal of Agricultural Economics/Revue Canadienne d’Agroeconomie, 24 (2), pp. 23-30.

Carter, A., Jordan, V. and Stride, C. 2003. A guide to managing crop establishment. Soil Management Initiative, Chester,

Cook, R., King, J. and Jellis, G. 1984. Loss caused by cereal diseases and the economics of fungicidal control. Plant diseases: Infection, damage and loss.

Cook, S. M., Khan, Z. R. and Pickett, J. A. 2006. The use of push-pull strategies in integrated pest management. Annual Review of Entomology, 52 (1), pp. 375.

Damalas, C. A. and Eleftherohorinos, I. G. 2011. Pesticide exposure, safety issues, and risk assessment indicators. International Journal of Environmental Research and Public Health, 8 (5), pp. 1402-1419.

Davies, D. B. and Finney, J. B. 2002. Reduced cultivations for cereals: Research, development and advisory needs under changing economic circumstances. Home Grown Cereals Authority.

Davis, D. R., Epp, M. D. and Riordan, H. D. 2004. Changes in USDA food composition data for 43 garden crops, 1950 to 1999. Journal of the American College of Nutrition, 23 (6), pp. 669-682.

Ehlers, W., Claupein, W. and Carter, M. 1994. Approaches toward conservation tillage in germany. Conservation Tillage in Temperate Agroecosystems. pp. 141-165.

Fallah, S. and Rasouliazar, S. 2016. Prioritizing the factors affecting the wheat losses from the perspective of wheat farmers of mahabad city. European Online Journal of Natural and Social Sciences: Proceedings, 4 (1 (s)), pp. pp. 1638-1650.

Fan, M., Zhao, F., Fairweather-Tait, S. J., Poulton, P. R., Dunham, S. J. and McGrath, S. P. 2008. Evidence of decreasing mineral density in wheat grain over the last 160 years. Journal of Trace Elements in Medicine and Biology, 22 (4), pp. 315-324.

Fenster, C. and Peterson, G. 1979. Effects of no-tillage fallow as compared to conventional tillage in a wheat-fallow system. Research Bulletin-Agricultural Experiment Station, University of Nebraska.Nebraska.Agricultural Experiment Station (USA),

Fischer, R. and Edmeades, G. O. 2010. Breeding and cereal yield progress. Crop Science, 50 (Supplement_1), pp. S-85-S-98.

FitzPatrick, E. A. 1978. An introduction to soil science. Soil Science, 125 (4), pp. 271.

Flintham, J., Börner, A., Worland, A. and Gale, M. 1997. Optimizing wheat grain yield: Effects of rht (gibberellin-insensitive) dwarfing genes. The Journal of Agricultural Science, 128 (01), pp. 11-25.

Fry, W. E. 2012. Principles of plant disease management. Academic Press.

Gajri, P., Arora, V. K. and Prihar, S. S. 2002. Tillage for sustainable cropping. Food Products Press.

Gerrard, J. 2000. Fundamentals of soils routledge.

Ghaffar, A., Ehsanullah, N. A. and Khan, S. H. 2011. Influence of zinc and iron on yield and quality of sugarcane planted under various trench spacings. Pak.J.Agri.Sci, 48 (1), pp. 25-33.

Gibson, L. 2000. Plant competition. Agronomy Department, Iowa State University,

Graham, R., Senadhira, D., Beebe, S., Iglesias, C. and Monasterio, I. 1999. Breeding for micronutrient density in edible portions of staple food crops: Conventional approaches. Field Crops Research, 60 (1), pp. 57-80.

Hager, A. G., Wax, L. M., Bollero, G. A. and Stoller, E. W. 2003. Influence of diphenylether herbicide application rate and timing on common waterhemp (amaranthus rudis) control in soybean (glycine max) 1. Weed Technology, 17 (1), pp. 14-20.

Hardwick, N., Jones, D. and Slough, J. 2001. Factors affecting diseases of winter wheat in england and wales, 1989-98. Plant Pathology, 50 (4), pp. 453-462.

Hardwick, N., Slough, J. and Jones, D. 2000. The BCPC conference: Pests and diseases, volume 2. Proceedings of an international conference held at the brighton hilton metropole hotel, brighton, UK, 13-16 november 2000.British Crop Protection Council.

Hawkesford, M. J., Araus, J., Park, R., Calderini, D., Miralles, D., Shen, T., Zhang, J. and Parry, M. A. 2013. Prospects of doubling global wheat yields. Food and Energy Security, 2 (1), pp. 34-48.

HE, D., ZHAN, J. and XIE, L. 2016. Problems, challenges and future of plant disease management: From an ecological point of view. Journal of Integrative Agriculture, 15 (4), pp. 705-715.

Huber, D., Watson, R. and Steiner, G. 1965. Crop residues, nitrogen, and plant disease. Soil Science, 100 (5), pp. 302-308.

Jain, P. and Bhargava, M. 2007. Entomology: Novel approaches. New India Publishing.

James, W. C. 1974. Assessment of plant diseases and losses. Annual Review of Phytopathology, 12 (1), pp. 27-48.

Jenkinson, n. P. and Parry, D. 1994. Isolation of fusarium species from common broad-leaved weeds and their pathogenicity to winter wheat. Mycological Research, 98 (7), pp. 776-780.

Johnston, J. and Fellow, L. T. S. 2005. Assessing soil fertility: The importance of soil analysis and its interpretation. Potash Development Association.

Jordan, V., Hutcheon, J. and Kendall, D. 1997. Influence of cultivation practices on arable crop pests, diseases and weeds and their control requirements. Experience with the Applicability of Notillage Crop Production in the West-European Countries, pp. 43-50.

Maloy, O. 2005. Plant Disease Management.the Plant Health Instructor DOI: 10.1094,

Monasterio, I. and Graham, R. D. 2000. Breeding for trace minerals in wheat. Food and Nutrition Bulletin, 21 (4), pp. 392-396.

Morris, N., Miller, P., Orson, J. and Froud-Williams, R. 2010. The adoption of non-inversion tillage systems in the United Kingdom and the agronomic impact on soil, crops and the environment-A review. Soil and Tillage Research, 108 (1), pp. 1-15.

Murphy, W. S., Brodie, B. B. and Good, J. M. 1974. Population dynamics of plant nematodes in cultivated soil: Effects of combinations of cropping systems and nematicides. Journal of Nematology, 6 (3), pp. 103-107.

Nicholls, C. J. 2013. Research review no. 77. Implications of the Restriction on the Neonicotinoids: Imidacloprid, Clothianidin and Thiamethoxam on Crop Protection in Oilseeds and Cereals in the UK.HGCA,

Nicholls, C. J. 2013. Research review no. 77. Implications of the Restriction on the Neonicotinoids: Imidacloprid, Clothianidin and Thiamethoxam on Crop Protection in Oilseeds and Cereals in the UK.HGCA,

Oerke, E. 2006. Crop losses to pests. The Journal of Agricultural Science, 144 (01), pp. 31-43.

Oerke, E. and Dehne, H. 2004. Safeguarding production-losses in major crops and the role of crop protection. Crop

 

Cite This Work

To export a reference to this article please select a referencing stye below:

Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.

Related Services

View all

DMCA / Removal Request

If you are the original writer of this essay and no longer wish to have your work published on UKEssays.com then please: