Quick Response Manufacturing (QRM) is a companywide strategy that pursues the reduction of lead-time in all aspects of a company's operations while simultaneously reducing costs and improving quality.
- Externally, as perceived by customers, QRM means responding to those customers' needs by rapidly designing and manufacturing products customized to those needs.
- Internally, in terms of a company's own operations, QRM focuses on reducing the lead times for all tasks in a company, resulting in improved quality, lower cost, and of course, quick response.
QRM redefines the traditional definition of lead-time, the time between receiving an order from a customer and delivering the order to the customer, and renames the metric Manufacturing Critical-path Time (MCT). QRM can be implemented either with large breakthrough improvements or continuously, as it strives to stay proactive in an effort to minimize costly future operating expenses.
QRM finds its roots in a strategy used by Japanese enterprises in the 1980's known as time-based competition or TBC. The basis of TBC is the use of speed to gain competitive advantage. Rajan Suri, the father of QRM, superseded TBC and improved on other continuous improvement programs by not only competing on speed, but by providing instruction to successfully integrate QRM methodology throughout every aspect of a company all in stride of a common goal. QRM was first introduced to the world in 1993 when the Center for Quick Response Manufacturing was founded at the University of Wisconsin-Madison. QRM gained notable recognition when Dr. Rajan Suri published the article "Slaying the Beast" in 1995, commenting on bad policies in manufacturing companies and offering insightful explanations.1 Due to the positive response he got from the book, Suri continued to write on the subject and consulted businesses in implementing QRM. Since then, the Center for QRM has helped almost 180 companies apply QRM methodologies thus reducing their lead times.2 These companies utilizing QRM became successful in their markets as the implementation of speed is crucial to competition.
Get your grade
or your money back
using our Essay Writing Service!
It's not necessary to work harder, faster and longer hours to complete job earlier. One can focus on finding new ways to complete a job that takes lower time. Most of the time a job spends in a queue instead of in process and traditional approach only look to reduce processing time (touch time) and in QRM focus is on lead-time (total elapsed time) and not just processing time. Out of total lead-time 34 days only 19.5 hours is a touch time so it makes sense that we should focus on whole 34 days.
But generally organizations are not designed to focus on lead-time. Mainly because organizations don't recognize the cost of waiting they mainly focus on processing time like one need to reduce batch sizes to reduce waiting time but it will increase number of setups that will increase their processing time which is mostly opposing to company goals.
So, Companies need to change their accounting systems and reward systems so that benefits of reduction in lead-time can be measured and rewarded appropriately.
There is one major problem with cost based systems that hinders QRM implementation that is functional structure of an organization. Looking the figure one can see how organizations fell into vicious circle by delaying regular jobs because of "hot jobs" and then again increase in "hot jobs" due to insertion of safety time due to delay in regular jobs. This is also called response time spiral. And so the spiral grows.
QRM focus on reducing system in time like we do in service industry but this will require substantial reorganization of most of the processes. Basically, we will end up with cellular organizations in shop floor and also in offices and each cell will focus on its customers. The POLCA material control system helps coordinate production across multiple cells. Also, new operating methods such as time slicing are described, to help cells share non-cell resources.
This principle is hard to digest as we believe that we should utilize capacity to its maximum possible value. Any reduction in the same would mean losing out on productive opportunities, resulting in increasing costs. However, by keeping all the machines busy at tall times does not necessarily transform into higher output or higher productivity. We frequently encounter the problems of growing queues due to the presence of a few bottleneck machines and jobs spending a lot of time waiting for resources due to mismanagement. All this ultimately results in increasing the lead time of the jobs which culminates in the increase of the organizational costs, which have been enlisted in the previous table. In the long run, these costs actually prove to be greater than the opportunity costs of not utilizing the spare capacity. Hence, the spare capacity should be considered as a strategic investment that will pay for itself many times over in increased sales, higher quality, and lower total costs.
Always on Time
Marked to Standard
This is again a measure which is very hard to digest. We always measure the usefulness of any process through its efficiency and utilization. However, the problem with the traditional belief is not the concept of efficiency, but that most measures of efficiency work counter to lead time reduction. Large batches are used in a lot of companies in a bid to reduce the setup costs. However this very measure results in increasing the lead time which can culminate in the same problems as enlisted in the previous principle. There are numerous examples to show the scope of reduction of lead time in organizations, a prominent one being the case study in Becker (2001) which showed how lead time for a line of spare parts for the oil drilling industry dropped from 40 days to 5 days using reduction of lead time as the main performance measure in a manufacturing cell.
QRM says that the quantities as calculated by EOQ are not appropriate and consistent with the goal of reducing lead time as EOQ doesn't consider many costs of large lots like expediting of late orders, overtime cost for trying to speed up late jobs, WIP holding costs including space. Also quality problems are detected much later than with small lots and the amount of rework and scrap generated is also much larger. At the same time, another important point which is missed in EOQ is the lack of responsiveness which occurs when the process is carried out with large lots. Large lots and planning for the same makes it difficult for the organization to respond quickly to change in customer needs. Nor can good lot sizes for QRM be predicted by the MRP system, since it assumes fixed queue times regardless of workload.
Hence, in order to reduce the lead times throughout the organization, it is important for everyone in a manufacturing firm, and especially for senior managers, to understand the dynamics of factory operations. The senior managers need to have a broad outlook and decide on the policies of manufacturing and performance measures only after fully understanding the effects of capacity utilization, efficiency measures, and lot sizing policies on lead time.
The differences between the traditional and QRM views can be observed from the figure given above. Traditional performance measures of utilization and efficiency encourage managers to exploit their resources to the maximum possible value. Production is considered infeasible only when the capacity utilization exceeds their maximize resource utilization, and only think about their capacity limit as a boundary between feasible and infeasible production targets. Also the perception is that larger lot sizes lead to increase in efficiency. However, QRM's focus is solely on reducing lead time, and hence the impact of utilization and lot size on the same is studied. Higher utilization leads to increase in lead time, whereas lead time first decreases and then increases with increase in lot size. It is essential to consider all such manufacturing dynamics in order to come up with a process that minimizes the lead time and thereby costs.
According to QRM on-time performance is an outcome not a performance measure. Because if on time is considered as performance measure departments will quote longer lead-time to match up with on-time delivery. Again this will result in Response time spiral and results in poor performance of organization. But with QRM, organization will focus on shortening lead-time as a performance measure. In QRM it's called QRM Number (measure of lead time reduction). This will eliminates Response Time Spiral and performance of organization will improve. For example see Table 2.
MRP systems are of great help in managing material supply and ordering but lead-time cannot be reduced using MRP. MRP should be used on high level planning and coordination not on cell level in a cellular structure implemented by QRM. Whereas POLCO can be used to manage material between cells and inside cells. POLCO basically a hybrid of push and pull systems using benefits of both.
This phenomena can be again seen as entering in Response Time Spiral in which if company buys in large batches this makes supplier to have longer lead time and company to order even larger batches. Internal and external incentives like discounts motivate ordering in large batches. The results this can be verified in John Deere where implementation of QRM with suppliers reduced cost and also improved quality with shorter lead-time and batches.
This Essay is
a Student's Work
This essay has been submitted by a student. This is not an example of the work written by our professional essay writers.Examples of our work
Not only at the supply side, the small lot concept needs to be applied at the distribution end too. Normally it is the tendency of the sales force to get higher orders by offering quantity discounts. This will again lead to the spiral of increasing lot sizes, both during the process as well as on the procurement side, ultimately leading to lowering of delivery performance. By implementing QRM, a company can reduce its costs manifold which can then be passed on to the customers. There is a need to demonstrate to the customer that the company can deliver high quality at low prices even for small lots, which would be more beneficial both to the company as well as the customer. Thus, the idea of small lots percolates throughout the organization, from top to bottom, as well as throughout the supply chain, from supplier to customer.
The traditional approach might result in local quality improvements in the respective departments. However, QRM is more concerned with the overall organization than just one department. The requirement is to cut the overall lead time for manufacturing as well as office operations for which Q-ROCs are more appropriate. Such Q-ROCs result in significant reduction of lead times for jobs such as cost estimating, quoting, and order processing. Closed-loop implies that the team would be self-sufficient in dealing with all the problems related to reducing lead time. This implies cutting across functional boundaries and changing the reporting structures to ensure the success of the process. Needless to say, this team needs to be given power in order to make the decisions as reducing lead time is the primary goal of the organization. The best example would be that of Ingersoll Cutting Tool Company, in Rockford, which reduced its engineering and order processing time for customized cutters from 10 days to half a day after implementing QRM principles. However, QRM should not be considered as an application of Reengineering as by using principles of system dynamics in the design of Q-ROCs, providing specific engineering and management principles for manufacturing organizations, plus by changing management principles and performance measures and adopting a company-wide approach, QRM goes much deeper than Reengineering.
Charging more for speedy response is sustainable only in the short-term. In the long run, it is quality which differentiates a product from its competitors, and the same purpose is served by QRM. Searching for ways of squeezing time out uncovers quality problems and wasted efforts. Changing policies and adopting measures to rectify the same results in higher quality, lower WIP, less overhead, lower operating costs, and greater sales. The QRM Approach yields even better results than Lean Manufacturing as it ignores the wastes caused by long lead times. QRM takes the goal of waste reduction to the next level, creating an even leaner enterprise that will remain a formidable competitor for years to come.
As we have seen in many quality improving methodologies like Six Sigma, House of Quality the most important factor in the success of these initiatives is their acceptance by all the members of the organization; and QRM is no different. Realigning of all employees, from the shop floor to the boardroom, from desk workers to senior managers, to the QRM principles is a pre-requisite for the success of QRM, and hence training gains significance. Normally, performance measurement is tied to the cost accounting system which is an impediment to the successful implementation of QRM. Performance measurement must be aligned with the principles of QRM if the company has to benefit from the same.
In a nutshell, the following points can be summarized about Quick Response Manufacturing:
- It requires measurement and efforts to minimize the metric, Manufacturing Critical-path Time (MCT), which is defined as the typical amount of calendar time from when a customer creates an order, through the critical-path, until the first piece of that order is delivered to the customer.
- QRM requires four fundamental structural changes to transform a company organized around cost-based management strategies to a time-based focus]
- Functional to Cellular:Cellular manufacturing is a pre-requisite of QRM as the cells yield greater flexibility in manufacturing
- Top-down Control to Team Ownership:QRM requires the formation of closed-loop, cross-functional teams which need to be given complete power for monitoring the processes.
- Specialized Workers to a Cross-trained Workforce:Since the success of the process requires reduction in lead times across all the departments, workers need to be trained to perform multiple tasks and have a broader outlook. 3.
- Efficiency/Utilization Goals to Lead Time Reduction:The evaluation parameters, performance measures have to shift from the traditional accounting measures to the goal of lead time reduction.
QRM theory recommends following four common steps when implementing QRM:
- Creating a QRM mindset:
- Changing of organizational structure:
- Inclusion of system dynamics:
- Enterprisewide expansion of QRM:
The most important part is to make people realise the advantages of QRM over the previous measures i.e. the wastes created due to long lead time which are even ignored in Lean Manufacturing. Thereafter, a high-level QRM Steering Committee needs to be formed and entrusted with the task of overseeing all QRM efforts, while a QRM Champion - an experienced employee with sound QRM training - is charged with driving and overseeing projects on a day-to-day basis.
Cross-functional planning team are formed to study feasible projects to which QRM can be applied. This would require a detailed analysis of the MCT, product volumes, strategic needs and other factors. Thereafter, QRM cells are formed and training and cross-training is provided to the operators in these cells by an implementation team, consisting of members in the new cell and members of the planning team. Measurement of MCT is done to monitor lead time.
During both design of the cell and its operation, the implementation team should reexamine policies on utilization to properly plan the loading of the cells, maintain spare capacity and reduce batch sizes.
The process would typically begin with a single project. If the project is a success, its results need to be conveyed to all the members of the organization and more projects need to be undertaken based on QRM principles. QRM should then be applied not only throughout the organization but also throughout the supply chain. E.g. the suppliers should also be motivated to inculcate and apply the principles of QRM which would have mutual benefits for both parties.
POLCA:The Material Control System for QRM.
POLCO is Paired-cell Overlapping Loops of Cards. To implement this system the company need to create cells of the production process focusing on subsets for similar parts and then it processes a given customer order through differing cells depending on the needs of that order.
High Level MRP is used to provide high level planning and coordination of materials from external suppliers and across these internal cells. But cells are managed individually.
Assume P1 focuses on color printing and P2 on black & white printing after which we have three Formatting Cells, F1, F2 and F3, which convert the printed sheets into reports with the desired pages. After formatting comes binding operation, which include punching holes and notches, cutting the sheets, and bending, A1 to A4. Finally, all orders go to the Shipping Cell S1, where the packaged plates are placed in shipping containers and then loaded onto carts. The material control system used is POLCA where High Level MRP and a cellular organization is a prerequisite.
In this case all Release times are created with the help of High Level MRP. But even after authorization of POLCO work will not begin until all conditions are met.
POLCO cards are used to communicate and control the material movement between cells. As Figure shows the POLCA card flows for a particular order at any organization based on initial design. This order's routing takes it from P1 to F2, then to A4 for binding, and finally to S1 to be shipped. This order will therefore proceed through the POLCA card loops with the pairs P1/F2, F2/A4 and A4/S1, as shown in the figure.
If cell P1 has a job authorized that is going to F3 next, then a P1/F3 card must be available at P1 in order for it to begin that job. If a P1/F3 card is not available, that means that there is a bottleneck at F3 and working on that job will only add to the work-in-process at F3. Instead, it would be better for P1 to put its resources into a job that is needed by another cell that is not backlogged. So the cell team at P1 skips the P1/F3 job for now, and looks at the next authorized job to see if a card is available for that job, and so on.
Differences from KANBAN:
- POLCO cards only control flow between cells not within
- POLCA cards are not product specific but they are specific to particular pair of cells.
- POLCO cards are used as capacity signal whereas Kanban is used as inventory signal. As return of POLCA card from a downstream cell signals that the cell has available capacity.
- POLCA helps in managing short-term fluctuations in capacity and also assists in reducing congestion on the shop floor. If a POLCA card from a downstream cell is not available, it means that that cell or some other cell further downstream is backlogged with work. Hence it does not make sense allocating further work to that particular job, without replanning of resources, as this will only increase inventory in the system since somewhere downstream there is a lack of capacity to work on this job. A better alternative would be to use this cell for some other job during the time being.
- POLCA cards flow in longer loops which allows the production to respond to changes in demand or differences in the complexities of jobs. The additional jobs in the loop can act as a buffer to absorb variations in demand and product mix which makes it highly suitable to meet the needs of responsiveness. On the contrary, the pull system stresses on achieving constant takt times throughout the organization, ignoring the fact that a variety of products will require different manufacturing times.
Benefits of Quick Response Manufacturing:
- Product Leadership:
- Lower working capital:
- Better position to increase market share:
- Increased inventory turns:
- Reducing the cost of quality by minimizing rework:
- Cost Reduction:
- Increasing Long Term competitiveness
QRM enables a firm to have shorter time to market. Thus a firm can reach out to customers with the latest technology while competitors play catch-up. There are two ways of looking at it. The first is that a given point of time a firm's product would be superior to that of its competitor. Another point of view is that since a firm has shorter lead-time it can deliver technology that is openly available to the market much earlier. Thus, the firm can skim the market due to its superior product. This can be depicted on a time line as shown below.
Lower lead times permit companies to have lower raw material and finished goods inventory. As a result the working capital requirement is decreased. This places the firm in a better strategic position to utilize their resources and capital.
The lower lead times increase the firm's responsiveness to opportunities in the environment. This increased responsiveness will hopefully attract new clients and allow the firm to capture a larger percentage of the market.
Since the production system is triggered by demand, smaller batches are produced, inventory decreases, and the number of inventory turns increases. Many inefficient manufacturers mainly have large amounts of capital tied up in inventory; therefore, their inventory turns are low.
Cellular manufacturing places more responsibility and accountability on specific production teams, which inherently increases the quality of the product. It is much easier to pinpoint defects since the problems are directly traceable to certain teams or members. This has a positive impact on the quality of products.
QRM aims at finding opportunities to improve the existing process. This results in lower operating costs. Using QRM, companies are able to save, in some cases, up to 25% of total operating costs by solving problems before they happen.
QRM ultimately aims at enhancing the long-term competitiveness of the team. The above mentioned benefits are only the stepping stones in the right direction. The enhanced competitiveness of the firm ensures that is objective of enhancing shareholder value is fulfilled.
Issues of Quick Response Manufacturing:
- Increased reliance on suppliers:
- Change Management:
QRM requires a solid relationship with one's raw material suppliers. To react to demand, a manufacturing firm must closely partner with suppliers that will quickly accommodate the firm's production schedule. However, if the supplier cannot provide raw materials due to problems such as quality assurance/control, equipment repair or union labor, the manufacturing firm may not be able to meet customer requirements. This could result in stock outs and backorders.
It can be very difficult to implement QRM in a manufacturing environment. QRM is a business enabling philosophy that pushes authority down to lower levels and therefore, changes the roles and responsibilities of the employees. "Traditional" roles, h m lower levels through upper management, are drastically modified and the corporate infrastructure is typically altered. Employees can be extremely apathetic to these changes, which is a barrier that could significantly hinder the implementation process and the success of QRM. To implement QRM, companies must have representation from all disciplines including production, planning, purchasing, engineering, manufacturing, quality, finance and human resources to facilitate the implementation. All functional areas need to buy-in to QRM to successfully implement such w major change in the way the firm does business.
What Differentiates QRM from Lean?
- First and foremost is the QRM mindset: the driver for all the principles and strategies in QRM is reduction of lead-time. This time-based mindset results in many operating policies that are different from traditional ones. In contrast the driver in JIT/Lean is waste reduction.
- Although the business press has been talking about the importance of lead-time reduction, or "speed", for over a decade, we find that most companies still lack the knowledge and the tools to effectively reduce their lead times. Worse still, policies are in place that are lengthening, rather than shortening, lead times. QRM devotes a substantial amount of effort in educating management and workers on why these traditional policies result in long lead times, and in showing them the QRM principles that must be put in place instead.
- QRM is a companywide strategy. While the original implementation of JIT/Lean at Toyota may well have encompassed the whole company, most Western implementations of JIT/Lean have focused on manufacturing and materials management. In many cases, JIT/Lean has been interpreted even more narrowly as merely implementing a "pull" system with "Kanban" cards. In contrast, QRM clarifies at the outset that it is a companywide strategy with implications far beyond the shop floor, and principles for other company areas, such as, office operations, are clearly presented as part of the QRM philosophy.
- QRM provides rational principles and tools for lead-time reduction. QRM uses an understanding of system dynamics, and exploits this understanding to define the best structures and policies that will reduce lead times. QRM begins by educating employees and giving them insight into these system dynamics. This then helps justify, to management and workers, the need for changes in policies. State-of-the-art analysis tools such as the MPX software package incorporate this analysis of system dynamics and help to derive the specific changes needed and to quantify the benefits that would be achieved.
- While the JIT/Lean approach tries to eliminate variability, QRM recognizes that in certain markets responding to this variability may provide competitive advantage. Instead of eliminating variability, QRM creates an effective organization structure to cope with it and serve the market. QRM does this by exploiting its understanding of system dynamics.
- A specific example of the difference between JIT/Lean and QRM is the issue of delivery of material or components. "On-time delivery" is a cornerstone of JIT/Lean is implementation. And yet QRM's understanding of organizational dynamics shows that promoting on-time delivery results in dysfunctional dynamics with longer lead times and higher costs. QRM provides alternative metrics based on lead-time reduction that promise greater improvement in the long run.
- The QRM approach extends to supply management as well, and is called time-based supply management (Ericksen, 2000). Companies such as John Deere are finding that, particularly for smaller suppliers, the time based mindset and QRM principles offer an effective approach to target improvements at the supplier's operation. In addition, rapid results can be achieved, with significant improvements in supplier deliveries and quality, and reduction in supplier cost and lead time (Golden, 1999; Ericksen, 2000; Nelson, 2000).
- For companies making a large variety of products with variable demand, as well as for companies making highly engineered products, the JIT/Lean strategy of "pull" is either wasteful or breaks down altogether. For such companies, QRM provides an alternative strategy called POLCA, which combines the best features of "push" and "pull" without their drawbacks.
To summarize, QRM pursues the relentless reduction of lead-time - all QRM principles stem from this singular driving concern. Instead of management announcing dozens of programs and acronyms, QRM enables management to present one unified message to the organization, and all policies follow from this one driving strategy.
Examples of implementation of Quick Response Manufacturing:
The Milwaukee Company makes equipment supporting variable-speed electric drives.
Problem:When Trans-Coil Inc. told customers it would take a couple of weeks to fill an order, the process sometimes dragged on much longer. It had to improve its record for production time and meeting deadlines, or risk losing business. To solve the problem, Trans-Coil could have built large numbers of components in advance and kept them on shelves, ready for fast shipping. But it would have meant spending lots of money on raw materials, production and handling, with no assurances of selling the warehoused products. Worse yet, the company would have been stuck with unused, obsolete components when customers made even slight changes to their product specifications.
Solution:With quick-response manufacturing, companies minimize the time it takes for products to flow through their operations. It can make companies more nimble, responsive, and lower costs, according to the strategy's advocates. In changing its operations, Trans-Coil started with the factory. Production workers were cross-trained to do almost every job in the plant. That was a huge change from the old days when employees rarely stepped out of their designated work areas. Trans-Coil employees are now divided into work cells focused on smaller order sizes, including custom work, with teams of people responsible for getting products out the door as fast as possible. The company's customers have been asked to change their ordering habits. Previously, some customers ordered parts in large quantities with long lead times, so they wouldn't be caught with empty shelves. Now they order just what they need, with short lead times, which lowers their inventory costs.
Result:The production workers can switch jobs on a moment's notice depending on what's needed. Under the new methods, employees are much more involved with the entire manufacturing process, including office operations. Customer service representatives can schedule work orders as they talk with customers and suppliers. In some cases, suppliers are involved with product design changes. As a result of the business strategy changes, Trans-Coil has reduced product lead times by 90%. The company has lowered its operating and inventory costs, while at the same time taking on more orders and increasing productivity and profits. TCI's move to Quick Response Manufacturing methods has reduced lead-time from weeks to days (even 24 hours in some cases). Short lead-time means that TCI customers only order what they need, ultimately reducing their inventory costs. Changing the Clumsy process of making bicycles at Trek Bicycle:
The Company is one of the best bicycle manufacturers in the world.
Problem:In June 1997, the company was suffering from high manufacturing costs, long lead times and complete failure to build to schedule. The seasonality factor involved in this business adds to the woes of the company. Again the fact that the manufacturing department people had been working in such a working environment for quite some time, possibility of some real drastic change being accepted in the organization was very difficult. The President of the company was of the opinion that if this problem were not addressed quickly the business would be in serious trouble.
Solution:The Company appointed Rajan Suri to consult the company for implementation of the QRM system. The goal was used to reduce the corporate lead-time from 128 days to 30 days in one year. The priority was set straight as either the employees work towards it or work somewhere else. They first conducted QRM training sessions after which they tasked each of the manufacturing teams with lead-time reduction plans. They also had a corporate level goal for the same.
Result:Contrary to what they had expected the employees readily accepted the change and most of the manufacturing teams beat their goals by a huge margin. Because of this the company was able to do a better job with customer service, product development and back office operations. To define a measure the changes resulted in:
- Higher Gross Margins
- Less Inventory
- Higher sales due to higher fill rates
- Low manufacturing costs
The overall lead-time has been reduced by 50% and they expect to reduce it further by 25% in the coming year. Not only this but throughout the office there has been a drive to reduce the time it takes to develop new products, process credit applications and perform other tasks such as process orders and credit. A kind of QRM culture was successfully developed throughout the organization.
Examples of POLCA implementation in companies:
In partnership with its member companies, the Center for Quick Response Manufacturing (QRM) has implemented POLCA at several factories. For example, Rockwell Automation has implemented POLCA at factories in the US and Canada that makes motor control centers (Honerlaw and Cronce, 2001; Gilson, 2002). These factories already had cells in place and had obtained substantial lead-time reductions prior to implementing POLCA. The authors report that POLCA led to additional 15-30% reductions in lead time and work-in-process. At one factory, on-time deliveries between cells increased from under 40% to over 90%, verifying that POLCA truly helps the coordination of material flow across cells. At another factory, POLCA helped to increase output by 18%. It also eliminated the time previously spent by team leaders and schedulers on expediting. The system has been accepted - even praised - by shop floor employees and schedulers. A second example is provided by Olsen Engineering, a contract manufacturer that supplies hardened and precision ground steel pins, bushings, miscellaneous CNC parts, and tube bending parts. The manufacturing facility produces over 5000 different part numbers with highly variable demand, so pull did not seem appropriate, and thus the management team decided to implement POLCA (Dawson, Hansel, and Miller, 2002). The authors report that POLCA resulted in lead-time reductions ranging from 22% to 68%. Work in process and stock inventories were also reduced significantly, in some cases by as much as 90%! In addition, the POLCA system significantly improved the operator morale and instilled a culture of continuous improvement at the facility.
The experiences with these implementations have led us to develop a step-wise procedure for implementing POLCA in a factory. These steps address several practical issues such as establishing the prerequisites for POLCA, determining the POLCA loops, computing the number of POLCA cards, determining the quantum of work a POLCA card represents, and addressing part shortages. Details of this step-wise approach can be found in Krishnamurthy (2002) and Suri and Krishnamurthy (2003).
- Suri, R. (1998). Quick Response Manufacturing: A Companywide Approach to Reducing Lead Times, Portland: Productivity Press.
- Center for Quick Response Manufacturing Homepage. (2009). The University of Wisconsin-Madison College of Engineering Website, http://www.engr.wisc.edu/centers/cqrm