Quality Services Improvement

5454 words (22 pages) Essay

1st Jan 1970 General Studies Reference this

Disclaimer: This work has been submitted by a university student. This is not an example of the work produced by our Essay Writing Service. You can view samples of our professional work here.

Any opinions, findings, conclusions or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of UKEssays.com.

The Quality of Services in Emirates Airlines: The Challenges of Continuous Improvement

Summary

This study examines quality of services at Emirates Airlines and reflects on the associated market orientation. The study also examines challenges and avenues for continuous improvement. These inter-connected objectives shape three research questions that are addressed based on customer responses to a structured instrument. This instrument has its origins embedded in the wealth of developments in methodological aspects to do with service quality assessment. The ‘perception- expectation’ gap and the gap with respect to ‘service delivery’ are reviewed across a multitude of research studies that are pegged around the central conceptual feature of SERVQUAL. This concept is discussed in detail including instances of its use in examining the airline industry. A structured close ended questionnaire informs this study that uses data generated from 250 respondents. The study is limited in methodological rigor due to use of descriptive statistics alone but at the same time provides a rich narrative using the data that is often not possible unless results are very strongly skewed in the case on inferential statistics. The lack of robustness has arisen due to data gaps which the study acknowledges.

Get Help With Your Essay

If you need assistance with writing your essay, our professional essay writing service is here to help!

Find out more

Findings suggest that staff training on understanding the scope of service quality, and continuing with modernization and infrastructure upgrade- should be on top of the agenda at Emirates. The results also show that personalized attention provided to customers is a key selling point in why customers choose Emirates, but that there is lack of understanding related to proper customer relations management. Some conflicting results also tend to suggest that the dichotomy between customer expectations and perceptions is influenced by the relative offerings competitor airlines make. There is also a hint that short term resource impetuses like frequent flyer schemes do not do much to improve service quality perceptions. It is the long term embedded development of staff capabilities and understanding about the holistic nature of service quality that may prove to be ‘the’ competency for sustained competitive advantage. The study posits a need for further research in developing comparable service quality metrics across international airlines – that are available only in the US at present (AQR), and also a need for comparative case studies in the industry to inform globalization intentions.

Chapter 1: Introduction

1.1. Background

Emirates airlines is one of the largest and probably the most consistently profitable airlines of recent times. Since its inception in 1985 it has grown astronomically and in the last couple of years it has embarked upon a fleet upgrade and expansion that dwarfs other major airlines. It sailed through the 9/11 related downturn in aviation business, and the disturbance in the gulf to become an airlines whose success formula mystifies management wisdom. Off the cuff solutions to issues and problems as they arise seems to have worked exceedingly well for the airline. The airline claims to have an open culture and an open agenda where the need of privacy does not subsume the need to deliver from individual competencies under what can be termed a ‘fluid strategy process’ (Sull et al, 2006). The focus on fine issues and macro aspects alike are shared across all management levels comprising a multi-cultural workforce like no other airline.

The company is used to making leaps whether it is by using the recognition from airline of the year award in 1994 to establish itself among the giants, to the massive fleet expansion in 2004-2005- to become the envy of even the giants. Surviving the 9/11 depression clearly points to the merits in Emirates approach. The key issue seems in operating as a family, where when other airlines were downsizing and cutting staff, Emirates kept status quo on these fronts and communicated a feeling of belonging in its staff. This was the crucial lever that kept Emirates going- and in fact even prosper in times that were so trying for the industry. As Carlzon (1989) notes in his aft cited work ‘Moments of Truth’ this is flattening of structure in the true sense – so that messages get across quickly and effectively makes for a “powerful organisation that serves customers better and unleashes the energy in employees”. However, putting both these together to fine tune the market orientation through service quality is a challenge especially in times of growth and high momentum in external factors affecting the industry.

Other beliefs at Emirates like – around the prosperity of Dubai that it keeps as the nerve centre of its network, and keeping a rather conservative outlook towards alliancing with other airlines are not conventional. These shape a flexible core around which other attitudinal and behavioral aspects of the business model emerge. This emergence has often been punctuated with imposed or deliberated change – this study takes place at a time of deliberated change that of rapid expansion of Emirates airlines across the globe (Leckic, 2007).

The openness also transcends into the beliefs the airline has. The airline now seeks to grow more aggressively and reduce overt centering on Dubai. Creating a global brand based on current success is on the agenda. The airline realizes that reputations in a service industry are leveraged around service quality. In this light as it stretches out to routing across the globe and hiring more staff and acquiring physical infrastructure, that service quality does not get compromised – remains a concern close to heart (Sull et al, 2006; Byles, 2007, Leckic, 2007; Sending 2008).

1.2. Motivation

The international airline industry has seen a struggle to deliver profitability alongside ‘truly satisfying the flying public’ (Van Pham and Simpson, 2000). The alliancing arrangements, route mapping and offering packaged services through such alliances have tried to affect industry standards of service quality- which may not be the true reflection of customer expectations. The perception of customers about what is central to service quality vis-à-vis the state of affairs in crucial for informing service quality initiatives and the market orientation of a firm. Needless to say given the dynamic nature of offerings that exist across industries including the airline industry, such expectation-perception balances are continuously shifting, and are even more fast moving for an airline that is growing rapidly and encountering new customers around the globe. The challenge also thus extends to one of continuous improvement (Emirates, 2005-2007).

Given the success of Emirates and its unprecedented growth and plans for growth, it is clear that customer perceptions will be central to deciding performance in the future. In times of growth and expansion to new routes the probability of variation in service quality levels and variation in customer expectations is likely to be higher. How the airline can absorb such feedback to modify and fine tune its strategic marketing in the global environment is intriguing for managers, academics, and the wider industry -all having been amazed at the Emirates story so far. This study examines customer perceptions about service quality and relates it with market orientation to ponder over the way forward for Emirates, clearly something very central to research and practitioner interests in Emirates. The recommendations may also have some food for thought for the airline itself as it seeks continuous improvements for a story that is already a bestseller.

From a methodological perspective the use of service quality assessment approaches like the SERVQUAL and its interface with the market orientation of the company has been a motivation (Webb, 2000; Engelland, 1998; Devlin et al; 2002; Van Pham and Simpson, 2006). That these have informed the airline industry among others on service quality, customer and market orientation among others make this research founded on robust theoretical and methodological grounds.

1.3. Research Questions

This dissertation seeks to examine service quality at emirates, and examine the way forward as the airline seeks to market its image in times of rapid investment and growth.

The first builds upon the second as it is service quality perceptions as customer views that need to be the focus when shaping marketing strategies. This is in particular for a business model that is well resourced – as in the case of Emirates and the main concern seems to be of monitoring and improving customer uptake of service quality as the airline grows. This is to be contextualized with the market orientation of the company so far for shaping key initiatives that can augment the alignment between customer perceptions of service with their expectations of the same.

Thus three central questions that inform this dissertation are:

  • What factors affect service quality perceptions about Emirates airlines?
  • What factors are perceived to be central in informing continuous service quality improvement initiatives?
  • How do these perceptions associate with the market orientation of the airline from past initiatives?

1.4. Dissertation Outline

The dissertation starts with an introduction to the context, scope and potential contributions from this study as here. The next chapter examines the literature in detail examining the concept of quality before leading on to the idea of service quality and research to develop methodological and conceptual paradigms around it. The idea of market orientation as a complement and associated aspect is also dwelled upon before closing the literature review that also uses research evidence across industries including the airline industry.

The hypotheses development chapter links the research questions to the backdrop of service quality drawing upon the research site of the airline industry and the conceptual orientation from the literature review. The Hypotheses are aligned closely with a structured instrument – that is discussed in the approach and methodology chapter. The approach and methodology chapter also provides for a rationale for selection of methodology, issues in conducting the study, limitations, and a time plan based narrative of how the study has been conducted. The sample profile, data and methods in analyses description here is carried forward in the findings chapter where results associated with each of the hypotheses are presented. A discussion chapter connects the results for a further discussion on implications and then leads on to conclusions. Here the recommendations are once again highlighted as study deliverables under each of the research questions. This is followed by a discussion on study limitations that include revisiting methodological limitations discussed before. The final chapter closes by some focused suggestions about future research in the area of service quality that are argued to be of much use for the industry and for globally expanding firms like the Emirates

Chapter 2: Literature Review

2.1 Introduction

This comprehensive literature review builds up the agenda of examining service quality in extant literature by starting off in the realm of Quality itself. In discussing TQM and consumer expectations it opens up a window to start examining the specialized concept of service quality. This concept is discussed in all its nuances especially around SERVQUAL – definite leap both conceptually and methodologically in this area. This is linked up with the idea of market orientation to extract a conceptual backdrop relevant to the investigation under this study. The use of extant research both in the airline industry and in other industries provides for resources to adapt the concept of ‘gaps’ and dichotomy between service expectations and perceptions to shape hypotheses and instrument to collect data for this study.

2.2 The concept of Quality

Quality has always concerned the societal intent of consumption. The reasons are fairly colloquial at one level where lack of quality can result in insufficient and unsatisfactory delivery of requirements from a product or service. At another level – given the growing complexity of the business processes over the last century quality has evolved into a discipline – characterized by an equally intertwined interface between control, assurance, and management in general (Dooley, 2006). Broadly speaking in the business context – quality is the ‘perception of the ability’ of a product to satisfy its users. By extension it also applies to the processes and management of the processes that shape the product. However, the satisfying paradigm underpinning quality has multiple manifestations: “conformance”, “fitness for use”, “basic minimum requirements vs. attractiveness”, and as a matter of “interest and individual disposition” to name a few (e.g. Juran, 1945; Pirsig, 1974; Corsby, 1981; Kano, 1984; Reeves and Bednar, 1994).

The definition of quality is rather difficult to come by because of the sheer nature of its wide applicability and strands of origin- ranging from the practical business origins to metaphysical origins. The American Society for Quality aptly captures this subjectivity in understanding quality by stating it as …“a subjective term for which each person has their own definition” (Wade, 2005; ASQ, 2007). Quality management is made up of two complementary aspects one is quality assurance and the other is quality control. The former is about ensuring a basic minimum standard through upfront production process design. The latter is about reviewing and monitoring output to wean out the ‘defectives’. Assurance is thus inherently preventive and control is mainly curative in a functional sense (Gunter, 1998).

Irrespective of the disparate origins, quality management can be safely said to be largely associated with the idea of excellence. A range of concepts and their operationalisation stem from this broader view of quality and mark the growth in research and practice of quality management. Six Sigma, Quality Circles, and Total Quality Management- are but a few from amongst numerous such frames of reference (dti, 2007).

The idea of quality at the advent of the century had been around as a selection paradigm- accepting the superior and rejecting the inferior and biased towards ‘control at best’- most of the time the evaluation came from the end user. Along the business value chain as production became large scale after the 1st World War- quality assurance procedures started becoming formalized. It was not only the ‘end of the road’ customer assessment but also a series of filters ensuring only the better quality output being delivered to the customer made control and assurance an important in house practice . The inspection oriented quality control schema had its problems mainly in terms of competent individuals that could ensure monitoring despite not being the ‘know all’ skill set champions. Formalized roles of inspection and quality manager thus emerged and along side assurance models provided a great lift to quality management as a capability. Generic tools for quality management like the control chart emerged in the 1920s and statistical process control matured towards the middle of the century. The revival of the manufacturing of war torn Japan on mature principals of quality control and management finally brought quality management into the forefront. By the end of 1970s it was a global pre-occupation with everyone trying to imitate the success of Japanese low cost and high quality products (dti, 2007; Dooley, 2006).

When the word total quality came to the fore in 1970s and finally pinned quality management as a fundamental capability that ran through the organization. The West’s take on quality management was more about ‘standards’ than ‘culturalisation’-but based around the same operational frameworks as in Japan. These gave rise to national standards in response to the need to have a quality association with the national economy as a whole. At the business level quality is now a key management responsibility and a functional paradigm that has continuous improvement at its very heart (Gitlow et al., 1989).

Aside from the generalized profile of emergence of quality management above there are a few key landmarks that need to be noted. The first is probably the statistical developments in the 20s and 30s and the emergence of concepts related to probability of acceptance, risk, tolerance levels, and sampling aspects (Shewart, 1931; Dodge and Romig, 1959) – establishment of standards and societies also marked the 1930s and 40s (Hutchins, 1995; Dooley, 2006).

Industrial production was never under as much pressure as in the II world War. While quality assurance could not keep up with the pressure control came to the forefront to ensure acceptable working products. The maturing of the statistical processes and standards in this regard was a key development. The large scale transmission of these standards to the then military suppliers ensured that the War provided an acceleration to the diffusion of quality management standards and systems (Dooley, 2006; Grant and Lang, 1991).

With the end of the war in the formative phase of reconstruction quality was again given a ‘less rushed’ attention. The role of top management, the interface between organisation wide processes, among others found attention. Total quality control came to the fore as a holistic concept with a stage gate approach right from design to delivery to consumer (Fiegenbaum, 1951, 1957, 1961).

Find out how UKEssays.com can help you!

Our academic experts are ready and waiting to assist with any writing project you may have. From simple essay plans, through to full dissertations, you can guarantee we have a service perfectly matched to your needs.

View our services

As mentioned, the post war Japanese revival is a key factor in development of quality management. Over the 1950s and 1960s the ideas of cultaration of quality with pride in workmanship, top management support, liberalized communication and quality circles took hold stemming from Japanese success. The good practice concepts like quality circles emerged as competencies that were tightly woven into the culture of business unique to Japan and required some effort when it came to imitation by the west (Koyangi, 1964; Deming, 1967; Juran, 1967). Quality became integral to organisational behaviour, goals, and associated personnel development.

2.3 Total Quality Management, Consumer Expectations and Continuous Improvement

The coining of ‘Total Quality Management’ (TQM), encapsulates this coming of age of quality management as an indispensable competency in the competitive arena that is augmented by increasing customer expectations (Deming, 1986; Anderson et al., 1994; Akers; 1991; Stratton, 1990). The main characteristics-changes and developments though numerous can be safely said to be around making quality:

-a responsibility for everyone,

-a necessity rather than a differentiator,

– relate better to services and information, and ever increasing set of non-manufacturing industries.

– relate to best practices, dissemination and learning

-recognized a key function and accordingly resourced in organizations

– reinforce the primacy of the customer

(Green and Welsh, 1988; Marquardt, 1991; Dooley, 2006)

As TQM goes from strength to strength the balance between assurance, control, and the new fangled third strand – learning is becoming vital given the dynamic nature and complex requirements that are associated with quality (Green and Welsh, 1988). The standardized tools need to be customized for organisational applications with a sense to create the competitive edge-because the omnipresent paradigm itself is tending to defeat the objective to seeking the competitive edge through quality (Dean and Bowen, 1994). Context specificity or in other customization of model and tools is the call of the day for research and practice alike The generic nature however needs to be preserved in the background given wider economic and societal association of quality management. For instance, as new frontiers like e-commerce – open a fertile bed of quality concepts and models will be very valuable for learning and adaptation to the economic and social context (Doty et al., 1993; Dooley, 2006). .

However, having an adaptable bed for quality management across diverse industries to draw from is not sufficient. The societal realties have also undergone transition – quality needs to broaden its founding grounds to reflect on new aspects like information management and the virtual realm where quality may have to question its own foundations that are deeply rooted in manufacturing. The successful adaptation to non-manufacturing i.e. services however, is evidence of the emergent nature of quality management that can take on fresh challenges that include alignment to ever changing marketing and consumer orientation needs.

2.4 Service Quality

Service quality is a subjective concept that remains challenging to define and to measure (Cronin and Taylor, 1992). This associates itself and can be understood as the application of total quality in the service sector in the main and also implying the service function in frontline delivery of product in other industries. The understanding of service quality has been synthesized from extant literature by Jennifer Rowley (1998). In her work it is seen as a “perception judgment from a comparison of what they feel service organizations should offer and the performance of the organisation offering the services”. There is no dearth of definitions that try to pack in comprehensiveness to this abstract concept. For instance, Hedvall and Paltschik (1989) refer to ‘willingness and ability to serve’ with a mention of ‘access’, Lehtinen and Lehtinen(1982) view service quality in a three-dimensional space that looks at ‘interactive, physical and corporate’ quality facets. Furthermore Gronroos (1984) simplifies the idea by seeing service quality as shaped by ‘technical and functional’ aspects of quality (Rowley ,1988).

The link between service and performance and by extension satisfying the customer is challenging because services have a unique combination of characteristics. The first of these combinations is their intangibility- causing issues in measurement as they are a function of the ‘experience’ of the customer. The next is their perish ability -meaning that they cannot delivered from existing stock and thus lending a dynamic nature to service delivery that is difficult to condition. The third is inseparability between production and consumption of service and the last is heterogeneity or customizability as each end user receives a different level-nature of service partly owing to individualized perceptions that are involved in assessment (Zeithaml et al., 1985; Rowley, 1998; Engelland, 1998; Webb, 2000;; Devlin et al; 2002).

The need is thus to work on ‘perceptions’ to assess quality given the cognitive frame of reference that dominates the characteristics of service. The associated requirement is to be able to classify services so as to peg a cognitive frame on a type of service. Such an attempt has provided for groupings within the service industry as a starting point to deliver customized measurement models (Dotchin and Oakland, 1994). The influences on consumer expectations have also been classified to augment such efforts (Gronroos,1994) . While the seminal work towards generic developments like SERVQUAL (Parasuram et al., 1988), provide founding grounds to service quality measurement- literature sees several issues in the applicability of this generic framework. This also relates to the inclusion exclusion and reconfiguration of the understanding of service attributes and the industry categories discussed before (e.g. Sasser, 1978; Dotchin and Oakland, 1994). A critical perspective on SERVQUAL comes later but upfront – it is of essence is to recognize the importance and complexity in measurement given the sheer abstractness of the idea of service and its quality.

The customization of measurement efforts and models in light of different service industry groups has been key to efforts at improving measurement (Dotchin and Oakland, 1994). In SERVQUAL the conceptualization of satisfaction has been found to be too simplistic and the multiplicity of the ‘total experience’ is arguably not captured – this is in addition to the non-customized generic nature of the SERVQUAL. A longitudinal and sometimes phenomenological analysis is suggested to capture these nuanced but important characteristics of service quality (Singh, 1991; Rowley, 1994).

However, the difficult in devising a comprehensive tool still disposes wider practice of measurement to simplistic methods. Important adjustments and realizations like the use of ‘importance and satisfaction grid’ (Harvey, 1995) provide a very useful feedback and prioritization. For instance, high importance and poor satisfaction is a combination that merits urgent management attention.

Another important variable in the service quality metric that needs to be accounted for is the nature of the contract. Again this is because of the attribute of ‘psychological contracts’ that is unique in nature to services (Thornrow, 1998). This has found particular appeal in measurement related to provision of public services. Having formal, informal and psychological components in service contracts provide a platform for balancing expectations and perceptions. These are otherwise very difficult to manage given the basic characteristics of service discussed at the onset of this section. Finally the perceptual plane needs to be also looked at with a balance though by classical definition the perception of the customer is the defining feature of quality-for service quality in particular the perception of the provider and the resultant psychological interface is also key to the metric. The role of customers is also not to be taken uni-dimensionally. There are different stakeholder brackets eg. users, influencers, deciders, approvers that associate with a service category and also vary in their significance (Rowley, 1988). These influence the generic satisfaction and associated performance variable.

Given this multiplicity and the psychologically complex nature of interactions, the ‘relationship exchange’ process (Morgan and Hunt, 1994) is key to providing some cognitive stability to overtime service quality measurement. It is also a suitable conduit to ensure that feedback is smoothly translated into strategic action for improvement. Such relationships can be supported by associating service with some ‘bonds’ (Chu and Lin, 2004). For instance, providing unique services, incentives, and even building social ties between provider and customer. However, on the other hand, the impact of such relationships on service quality needs to be moderated for a reliable assessment. They provide grounds for stabilizing the psychological map to better associate performance and expectations but at the same time bias it.

2.5 Customer Satisfaction and Service Quality Perceptions

Broadly speaking customer satisfaction is a performance indicator of the extent to which a firm has managed to meet customer expectations through its business deliverables. Having formed the foundation of the marketing concept for nearly half a century the attempts at harnessing the good practices and measurement approaches is a much explored realm when it comes to customer satisfaction (e.g. Drucker, 1954; Levitt 1960; Gronroos, 1990).

Over the last few years customer satisfaction has received a reinvigorated interest. Possible reasons for this have been seen as the after effects of a maturing TQM paradigm that is linked with several recognition awards, and also, arrival of national customer satisfaction barometers (Garvin, 1991; Johnson et al., 2001; Helgesen, 2006)

The associated concept of customer relationship orientation is posits a strong link between customer loyalty and profitability with customer satisfaction (Zeithaml, 1988; Oliver, 1996). While customer loyalty has been referred to as central to ‘competitive advantage’ (Porter, 1985; Chao, et al., 2007)- this is delivered through customer -satisfaction. This is the basic rationalization behind customer satisfaction being so central to both short term and long term performance assessment.

That the ‘ultimate aim of any firm is to achieve customer satisfaction’ remains the central thesis of market orientation (Levitt, 1960). Customer orientation seeks to align “organizational values, beliefs, assumptions and premises” to deliver a mutually enabling relationship between the customer and the firm (Day, 1994; Strong and Harris, 2004).

Strong and Harris ( 2004), define a set of tactics that can deliver customer orientation. They define three sets of tactics. The first define relational tactics (essentially relationship marketing) that engages a nurturing philosophy for long run gains. The second tactic as human resource tactic is more about the direct interface with frontline of the customer and rest of the organisation -essentially empowering the front line through training and support to reap rewards of realized quality of experience of the customer. The final tactic relates to procedural aspects that routinise and systemize customer care and support systems. The study posits that there is a strong interaction and dependency between the three tactics. This key work that examines customer satisfaction and its manifestations under the customer orientation paradigm shares ground with some key extant literature (Narver and Slater, 1990)

However, other studies tend to put one set of such aspects – though differently labeled as more important than the others. For instance, Chao et al. (2007) say that

while satisfaction remains an abstract idea sometime there is an overt component of interpersonal relationship building that because of over emphasis- instead of complementing customer orientation tends wean resources away from conditioning deliverables to meet consumer expectations. Research suggests that such a lopsided drive is ill-found in the long run While relationship marketing remains important it has to be pegged on consumer satisfaction from products and services for sustainability (Chao et al., 2007).

Businesses need to focus attention on relationship building. This however has to be conditioned for long run profitability. Customer satisfaction through meeting expectations from goods, transaction services and pure services, and a sustained follow up and support culture has to be the basis for relationship building. For instance, financial incentives/offers are likely to be ineffective and short lived if quality is undermined. As most of the research in customer orientation gets focused on relationship building this is an important consideration to use as a moderator. Value to the customer can never be undermined for seeking short term profitability. This is because such profitability is not suitably tied in with satisfaction which in turn guides customer loyalty.

Views to the contrary also exist mainly from some practitioners. Bruce Clapp (2007) of the Carlson marketing group says that “relationship strength is more important than satisfaction as a true indicator of loyalty. Customizing the experience of our customers, in-branch and in home, impacts the strength of relationship as it builds. In the experience, ensuring our message is relevant requires that we be closer to our customer. The communication we use, whether direct mail, e-mail or in person, must be tailored to the needs of the customer at an individual level. The term mass customization has gained ground as we look for ways to become partners with our customers and be there when they have a financial nee

The Quality of Services in Emirates Airlines: The Challenges of Continuous Improvement

Summary

This study examines quality of services at Emirates Airlines and reflects on the associated market orientation. The study also examines challenges and avenues for continuous improvement. These inter-connected objectives shape three research questions that are addressed based on customer responses to a structured instrument. This instrument has its origins embedded in the wealth of developments in methodological aspects to do with service quality assessment. The ‘perception- expectation’ gap and the gap with respect to ‘service delivery’ are reviewed across a multitude of research studies that are pegged around the central conceptual feature of SERVQUAL. This concept is discussed in detail including instances of its use in examining the airline industry. A structured close ended questionnaire informs this study that uses data generated from 250 respondents. The study is limited in methodological rigor due to use of descriptive statistics alone but at the same time provides a rich narrative using the data that is often not possible unless results are very strongly skewed in the case on inferential statistics. The lack of robustness has arisen due to data gaps which the study acknowledges.

Findings suggest that staff training on understanding the scope of service quality, and continuing with modernization and infrastructure upgrade- should be on top of the agenda at Emirates. The results also show that personalized attention provided to customers is a key selling point in why customers choose Emirates, but that there is lack of understanding related to proper customer relations management. Some conflicting results also tend to suggest that the dichotomy between customer expectations and perceptions is influenced by the relative offerings competitor airlines make. There is also a hint that short term resource impetuses like frequent flyer schemes do not do much to improve service quality perceptions. It is the long term embedded development of staff capabilities and understanding about the holistic nature of service quality that may prove to be ‘the’ competency for sustained competitive advantage. The study posits a need for further research in developing comparable service quality metrics across international airlines – that are available only in the US at present (AQR), and also a need for comparative case studies in the industry to inform globalization intentions.

Chapter 1: Introduction

1.1. Background

Emirates airlines is one of the largest and probably the most consistently profitable airlines of recent times. Since its inception in 1985 it has grown astronomically and in the last couple of years it has embarked upon a fleet upgrade and expansion that dwarfs other major airlines. It sailed through the 9/11 related downturn in aviation business, and the disturbance in the gulf to become an airlines whose success formula mystifies management wisdom. Off the cuff solutions to issues and problems as they arise seems to have worked exceedingly well for the airline. The airline claims to have an open culture and an open agenda where the need of privacy does not subsume the need to deliver from individual competencies under what can be termed a ‘fluid strategy process’ (Sull et al, 2006). The focus on fine issues and macro aspects alike are shared across all management levels comprising a multi-cultural workforce like no other airline.

The company is used to making leaps whether it is by using the recognition from airline of the year award in 1994 to establish itself among the giants, to the massive fleet expansion in 2004-2005- to become the envy of even the giants. Surviving the 9/11 depression clearly points to the merits in Emirates approach. The key issue seems in operating as a family, where when other airlines were downsizing and cutting staff, Emirates kept status quo on these fronts and communicated a feeling of belonging in its staff. This was the crucial lever that kept Emirates going- and in fact even prosper in times that were so trying for the industry. As Carlzon (1989) notes in his aft cited work ‘Moments of Truth’ this is flattening of structure in the true sense – so that messages get across quickly and effectively makes for a “powerful organisation that serves customers better and unleashes the energy in employees”. However, putting both these together to fine tune the market orientation through service quality is a challenge especially in times of growth and high momentum in external factors affecting the industry.

Other beliefs at Emirates like – around the prosperity of Dubai that it keeps as the nerve centre of its network, and keeping a rather conservative outlook towards alliancing with other airlines are not conventional. These shape a flexible core around which other attitudinal and behavioral aspects of the business model emerge. This emergence has often been punctuated with imposed or deliberated change – this study takes place at a time of deliberated change that of rapid expansion of Emirates airlines across the globe (Leckic, 2007).

The openness also transcends into the beliefs the airline has. The airline now seeks to grow more aggressively and reduce overt centering on Dubai. Creating a global brand based on current success is on the agenda. The airline realizes that reputations in a service industry are leveraged around service quality. In this light as it stretches out to routing across the globe and hiring more staff and acquiring physical infrastructure, that service quality does not get compromised – remains a concern close to heart (Sull et al, 2006; Byles, 2007, Leckic, 2007; Sending 2008).

1.2. Motivation

The international airline industry has seen a struggle to deliver profitability alongside ‘truly satisfying the flying public’ (Van Pham and Simpson, 2000). The alliancing arrangements, route mapping and offering packaged services through such alliances have tried to affect industry standards of service quality- which may not be the true reflection of customer expectations. The perception of customers about what is central to service quality vis-à-vis the state of affairs in crucial for informing service quality initiatives and the market orientation of a firm. Needless to say given the dynamic nature of offerings that exist across industries including the airline industry, such expectation-perception balances are continuously shifting, and are even more fast moving for an airline that is growing rapidly and encountering new customers around the globe. The challenge also thus extends to one of continuous improvement (Emirates, 2005-2007).

Given the success of Emirates and its unprecedented growth and plans for growth, it is clear that customer perceptions will be central to deciding performance in the future. In times of growth and expansion to new routes the probability of variation in service quality levels and variation in customer expectations is likely to be higher. How the airline can absorb such feedback to modify and fine tune its strategic marketing in the global environment is intriguing for managers, academics, and the wider industry -all having been amazed at the Emirates story so far. This study examines customer perceptions about service quality and relates it with market orientation to ponder over the way forward for Emirates, clearly something very central to research and practitioner interests in Emirates. The recommendations may also have some food for thought for the airline itself as it seeks continuous improvements for a story that is already a bestseller.

From a methodological perspective the use of service quality assessment approaches like the SERVQUAL and its interface with the market orientation of the company has been a motivation (Webb, 2000; Engelland, 1998; Devlin et al; 2002; Van Pham and Simpson, 2006). That these have informed the airline industry among others on service quality, customer and market orientation among others make this research founded on robust theoretical and methodological grounds.

1.3. Research Questions

This dissertation seeks to examine service quality at emirates, and examine the way forward as the airline seeks to market its image in times of rapid investment and growth.

The first builds upon the second as it is service quality perceptions as customer views that need to be the focus when shaping marketing strategies. This is in particular for a business model that is well resourced – as in the case of Emirates and the main concern seems to be of monitoring and improving customer uptake of service quality as the airline grows. This is to be contextualized with the market orientation of the company so far for shaping key initiatives that can augment the alignment between customer perceptions of service with their expectations of the same.

Thus three central questions that inform this dissertation are:

  • What factors affect service quality perceptions about Emirates airlines?
  • What factors are perceived to be central in informing continuous service quality improvement initiatives?
  • How do these perceptions associate with the market orientation of the airline from past initiatives?

1.4. Dissertation Outline

The dissertation starts with an introduction to the context, scope and potential contributions from this study as here. The next chapter examines the literature in detail examining the concept of quality before leading on to the idea of service quality and research to develop methodological and conceptual paradigms around it. The idea of market orientation as a complement and associated aspect is also dwelled upon before closing the literature review that also uses research evidence across industries including the airline industry.

The hypotheses development chapter links the research questions to the backdrop of service quality drawing upon the research site of the airline industry and the conceptual orientation from the literature review. The Hypotheses are aligned closely with a structured instrument – that is discussed in the approach and methodology chapter. The approach and methodology chapter also provides for a rationale for selection of methodology, issues in conducting the study, limitations, and a time plan based narrative of how the study has been conducted. The sample profile, data and methods in analyses description here is carried forward in the findings chapter where results associated with each of the hypotheses are presented. A discussion chapter connects the results for a further discussion on implications and then leads on to conclusions. Here the recommendations are once again highlighted as study deliverables under each of the research questions. This is followed by a discussion on study limitations that include revisiting methodological limitations discussed before. The final chapter closes by some focused suggestions about future research in the area of service quality that are argued to be of much use for the industry and for globally expanding firms like the Emirates

Chapter 2: Literature Review

2.1 Introduction

This comprehensive literature review builds up the agenda of examining service quality in extant literature by starting off in the realm of Quality itself. In discussing TQM and consumer expectations it opens up a window to start examining the specialized concept of service quality. This concept is discussed in all its nuances especially around SERVQUAL – definite leap both conceptually and methodologically in this area. This is linked up with the idea of market orientation to extract a conceptual backdrop relevant to the investigation under this study. The use of extant research both in the airline industry and in other industries provides for resources to adapt the concept of ‘gaps’ and dichotomy between service expectations and perceptions to shape hypotheses and instrument to collect data for this study.

2.2 The concept of Quality

Quality has always concerned the societal intent of consumption. The reasons are fairly colloquial at one level where lack of quality can result in insufficient and unsatisfactory delivery of requirements from a product or service. At another level – given the growing complexity of the business processes over the last century quality has evolved into a discipline – characterized by an equally intertwined interface between control, assurance, and management in general (Dooley, 2006). Broadly speaking in the business context – quality is the ‘perception of the ability’ of a product to satisfy its users. By extension it also applies to the processes and management of the processes that shape the product. However, the satisfying paradigm underpinning quality has multiple manifestations: “conformance”, “fitness for use”, “basic minimum requirements vs. attractiveness”, and as a matter of “interest and individual disposition” to name a few (e.g. Juran, 1945; Pirsig, 1974; Corsby, 1981; Kano, 1984; Reeves and Bednar, 1994).

The definition of quality is rather difficult to come by because of the sheer nature of its wide applicability and strands of origin- ranging from the practical business origins to metaphysical origins. The American Society for Quality aptly captures this subjectivity in understanding quality by stating it as …“a subjective term for which each person has their own definition” (Wade, 2005; ASQ, 2007). Quality management is made up of two complementary aspects one is quality assurance and the other is quality control. The former is about ensuring a basic minimum standard through upfront production process design. The latter is about reviewing and monitoring output to wean out the ‘defectives’. Assurance is thus inherently preventive and control is mainly curative in a functional sense (Gunter, 1998).

Irrespective of the disparate origins, quality management can be safely said to be largely associated with the idea of excellence. A range of concepts and their operationalisation stem from this broader view of quality and mark the growth in research and practice of quality management. Six Sigma, Quality Circles, and Total Quality Management- are but a few from amongst numerous such frames of reference (dti, 2007).

The idea of quality at the advent of the century had been around as a selection paradigm- accepting the superior and rejecting the inferior and biased towards ‘control at best’- most of the time the evaluation came from the end user. Along the business value chain as production became large scale after the 1st World War- quality assurance procedures started becoming formalized. It was not only the ‘end of the road’ customer assessment but also a series of filters ensuring only the better quality output being delivered to the customer made control and assurance an important in house practice . The inspection oriented quality control schema had its problems mainly in terms of competent individuals that could ensure monitoring despite not being the ‘know all’ skill set champions. Formalized roles of inspection and quality manager thus emerged and along side assurance models provided a great lift to quality management as a capability. Generic tools for quality management like the control chart emerged in the 1920s and statistical process control matured towards the middle of the century. The revival of the manufacturing of war torn Japan on mature principals of quality control and management finally brought quality management into the forefront. By the end of 1970s it was a global pre-occupation with everyone trying to imitate the success of Japanese low cost and high quality products (dti, 2007; Dooley, 2006).

When the word total quality came to the fore in 1970s and finally pinned quality management as a fundamental capability that ran through the organization. The West’s take on quality management was more about ‘standards’ than ‘culturalisation’-but based around the same operational frameworks as in Japan. These gave rise to national standards in response to the need to have a quality association with the national economy as a whole. At the business level quality is now a key management responsibility and a functional paradigm that has continuous improvement at its very heart (Gitlow et al., 1989).

Aside from the generalized profile of emergence of quality management above there are a few key landmarks that need to be noted. The first is probably the statistical developments in the 20s and 30s and the emergence of concepts related to probability of acceptance, risk, tolerance levels, and sampling aspects (Shewart, 1931; Dodge and Romig, 1959) – establishment of standards and societies also marked the 1930s and 40s (Hutchins, 1995; Dooley, 2006).

Industrial production was never under as much pressure as in the II world War. While quality assurance could not keep up with the pressure control came to the forefront to ensure acceptable working products. The maturing of the statistical processes and standards in this regard was a key development. The large scale transmission of these standards to the then military suppliers ensured that the War provided an acceleration to the diffusion of quality management standards and systems (Dooley, 2006; Grant and Lang, 1991).

With the end of the war in the formative phase of reconstruction quality was again given a ‘less rushed’ attention. The role of top management, the interface between organisation wide processes, among others found attention. Total quality control came to the fore as a holistic concept with a stage gate approach right from design to delivery to consumer (Fiegenbaum, 1951, 1957, 1961).

As mentioned, the post war Japanese revival is a key factor in development of quality management. Over the 1950s and 1960s the ideas of cultaration of quality with pride in workmanship, top management support, liberalized communication and quality circles took hold stemming from Japanese success. The good practice concepts like quality circles emerged as competencies that were tightly woven into the culture of business unique to Japan and required some effort when it came to imitation by the west (Koyangi, 1964; Deming, 1967; Juran, 1967). Quality became integral to organisational behaviour, goals, and associated personnel development.

2.3 Total Quality Management, Consumer Expectations and Continuous Improvement

The coining of ‘Total Quality Management’ (TQM), encapsulates this coming of age of quality management as an indispensable competency in the competitive arena that is augmented by increasing customer expectations (Deming, 1986; Anderson et al., 1994; Akers; 1991; Stratton, 1990). The main characteristics-changes and developments though numerous can be safely said to be around making quality:

-a responsibility for everyone,

-a necessity rather than a differentiator,

– relate better to services and information, and ever increasing set of non-manufacturing industries.

– relate to best practices, dissemination and learning

-recognized a key function and accordingly resourced in organizations

– reinforce the primacy of the customer

(Green and Welsh, 1988; Marquardt, 1991; Dooley, 2006)

As TQM goes from strength to strength the balance between assurance, control, and the new fangled third strand – learning is becoming vital given the dynamic nature and complex requirements that are associated with quality (Green and Welsh, 1988). The standardized tools need to be customized for organisational applications with a sense to create the competitive edge-because the omnipresent paradigm itself is tending to defeat the objective to seeking the competitive edge through quality (Dean and Bowen, 1994). Context specificity or in other customization of model and tools is the call of the day for research and practice alike The generic nature however needs to be preserved in the background given wider economic and societal association of quality management. For instance, as new frontiers like e-commerce – open a fertile bed of quality concepts and models will be very valuable for learning and adaptation to the economic and social context (Doty et al., 1993; Dooley, 2006). .

However, having an adaptable bed for quality management across diverse industries to draw from is not sufficient. The societal realties have also undergone transition – quality needs to broaden its founding grounds to reflect on new aspects like information management and the virtual realm where quality may have to question its own foundations that are deeply rooted in manufacturing. The successful adaptation to non-manufacturing i.e. services however, is evidence of the emergent nature of quality management that can take on fresh challenges that include alignment to ever changing marketing and consumer orientation needs.

2.4 Service Quality

Service quality is a subjective concept that remains challenging to define and to measure (Cronin and Taylor, 1992). This associates itself and can be understood as the application of total quality in the service sector in the main and also implying the service function in frontline delivery of product in other industries. The understanding of service quality has been synthesized from extant literature by Jennifer Rowley (1998). In her work it is seen as a “perception judgment from a comparison of what they feel service organizations should offer and the performance of the organisation offering the services”. There is no dearth of definitions that try to pack in comprehensiveness to this abstract concept. For instance, Hedvall and Paltschik (1989) refer to ‘willingness and ability to serve’ with a mention of ‘access’, Lehtinen and Lehtinen(1982) view service quality in a three-dimensional space that looks at ‘interactive, physical and corporate’ quality facets. Furthermore Gronroos (1984) simplifies the idea by seeing service quality as shaped by ‘technical and functional’ aspects of quality (Rowley ,1988).

The link between service and performance and by extension satisfying the customer is challenging because services have a unique combination of characteristics. The first of these combinations is their intangibility- causing issues in measurement as they are a function of the ‘experience’ of the customer. The next is their perish ability -meaning that they cannot delivered from existing stock and thus lending a dynamic nature to service delivery that is difficult to condition. The third is inseparability between production and consumption of service and the last is heterogeneity or customizability as each end user receives a different level-nature of service partly owing to individualized perceptions that are involved in assessment (Zeithaml et al., 1985; Rowley, 1998; Engelland, 1998; Webb, 2000;; Devlin et al; 2002).

The need is thus to work on ‘perceptions’ to assess quality given the cognitive frame of reference that dominates the characteristics of service. The associated requirement is to be able to classify services so as to peg a cognitive frame on a type of service. Such an attempt has provided for groupings within the service industry as a starting point to deliver customized measurement models (Dotchin and Oakland, 1994). The influences on consumer expectations have also been classified to augment such efforts (Gronroos,1994) . While the seminal work towards generic developments like SERVQUAL (Parasuram et al., 1988), provide founding grounds to service quality measurement- literature sees several issues in the applicability of this generic framework. This also relates to the inclusion exclusion and reconfiguration of the understanding of service attributes and the industry categories discussed before (e.g. Sasser, 1978; Dotchin and Oakland, 1994). A critical perspective on SERVQUAL comes later but upfront – it is of essence is to recognize the importance and complexity in measurement given the sheer abstractness of the idea of service and its quality.

The customization of measurement efforts and models in light of different service industry groups has been key to efforts at improving measurement (Dotchin and Oakland, 1994). In SERVQUAL the conceptualization of satisfaction has been found to be too simplistic and the multiplicity of the ‘total experience’ is arguably not captured – this is in addition to the non-customized generic nature of the SERVQUAL. A longitudinal and sometimes phenomenological analysis is suggested to capture these nuanced but important characteristics of service quality (Singh, 1991; Rowley, 1994).

However, the difficult in devising a comprehensive tool still disposes wider practice of measurement to simplistic methods. Important adjustments and realizations like the use of ‘importance and satisfaction grid’ (Harvey, 1995) provide a very useful feedback and prioritization. For instance, high importance and poor satisfaction is a combination that merits urgent management attention.

Another important variable in the service quality metric that needs to be accounted for is the nature of the contract. Again this is because of the attribute of ‘psychological contracts’ that is unique in nature to services (Thornrow, 1998). This has found particular appeal in measurement related to provision of public services. Having formal, informal and psychological components in service contracts provide a platform for balancing expectations and perceptions. These are otherwise very difficult to manage given the basic characteristics of service discussed at the onset of this section. Finally the perceptual plane needs to be also looked at with a balance though by classical definition the perception of the customer is the defining feature of quality-for service quality in particular the perception of the provider and the resultant psychological interface is also key to the metric. The role of customers is also not to be taken uni-dimensionally. There are different stakeholder brackets eg. users, influencers, deciders, approvers that associate with a service category and also vary in their significance (Rowley, 1988). These influence the generic satisfaction and associated performance variable.

Given this multiplicity and the psychologically complex nature of interactions, the ‘relationship exchange’ process (Morgan and Hunt, 1994) is key to providing some cognitive stability to overtime service quality measurement. It is also a suitable conduit to ensure that feedback is smoothly translated into strategic action for improvement. Such relationships can be supported by associating service with some ‘bonds’ (Chu and Lin, 2004). For instance, providing unique services, incentives, and even building social ties between provider and customer. However, on the other hand, the impact of such relationships on service quality needs to be moderated for a reliable assessment. They provide grounds for stabilizing the psychological map to better associate performance and expectations but at the same time bias it.

2.5 Customer Satisfaction and Service Quality Perceptions

Broadly speaking customer satisfaction is a performance indicator of the extent to which a firm has managed to meet customer expectations through its business deliverables. Having formed the foundation of the marketing concept for nearly half a century the attempts at harnessing the good practices and measurement approaches is a much explored realm when it comes to customer satisfaction (e.g. Drucker, 1954; Levitt 1960; Gronroos, 1990).

Over the last few years customer satisfaction has received a reinvigorated interest. Possible reasons for this have been seen as the after effects of a maturing TQM paradigm that is linked with several recognition awards, and also, arrival of national customer satisfaction barometers (Garvin, 1991; Johnson et al., 2001; Helgesen, 2006)

The associated concept of customer relationship orientation is posits a strong link between customer loyalty and profitability with customer satisfaction (Zeithaml, 1988; Oliver, 1996). While customer loyalty has been referred to as central to ‘competitive advantage’ (Porter, 1985; Chao, et al., 2007)- this is delivered through customer -satisfaction. This is the basic rationalization behind customer satisfaction being so central to both short term and long term performance assessment.

That the ‘ultimate aim of any firm is to achieve customer satisfaction’ remains the central thesis of market orientation (Levitt, 1960). Customer orientation seeks to align “organizational values, beliefs, assumptions and premises” to deliver a mutually enabling relationship between the customer and the firm (Day, 1994; Strong and Harris, 2004).

Strong and Harris ( 2004), define a set of tactics that can deliver customer orientation. They define three sets of tactics. The first define relational tactics (essentially relationship marketing) that engages a nurturing philosophy for long run gains. The second tactic as human resource tactic is more about the direct interface with frontline of the customer and rest of the organisation -essentially empowering the front line through training and support to reap rewards of realized quality of experience of the customer. The final tactic relates to procedural aspects that routinise and systemize customer care and support systems. The study posits that there is a strong interaction and dependency between the three tactics. This key work that examines customer satisfaction and its manifestations under the customer orientation paradigm shares ground with some key extant literature (Narver and Slater, 1990)

However, other studies tend to put one set of such aspects – though differently labeled as more important than the others. For instance, Chao et al. (2007) say that

while satisfaction remains an abstract idea sometime there is an overt component of interpersonal relationship building that because of over emphasis- instead of complementing customer orientation tends wean resources away from conditioning deliverables to meet consumer expectations. Research suggests that such a lopsided drive is ill-found in the long run While relationship marketing remains important it has to be pegged on consumer satisfaction from products and services for sustainability (Chao et al., 2007).

Businesses need to focus attention on relationship building. This however has to be conditioned for long run profitability. Customer satisfaction through meeting expectations from goods, transaction services and pure services, and a sustained follow up and support culture has to be the basis for relationship building. For instance, financial incentives/offers are likely to be ineffective and short lived if quality is undermined. As most of the research in customer orientation gets focused on relationship building this is an important consideration to use as a moderator. Value to the customer can never be undermined for seeking short term profitability. This is because such profitability is not suitably tied in with satisfaction which in turn guides customer loyalty.

Views to the contrary also exist mainly from some practitioners. Bruce Clapp (2007) of the Carlson marketing group says that “relationship strength is more important than satisfaction as a true indicator of loyalty. Customizing the experience of our customers, in-branch and in home, impacts the strength of relationship as it builds. In the experience, ensuring our message is relevant requires that we be closer to our customer. The communication we use, whether direct mail, e-mail or in person, must be tailored to the needs of the customer at an individual level. The term mass customization has gained ground as we look for ways to become partners with our customers and be there when they have a financial nee

Cite This Work

To export a reference to this article please select a referencing stye below:

Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.

Related Services

View all

DMCA / Removal Request

If you are the original writer of this essay and no longer wish to have your work published on the UKDiss.com website then please: