The Challenging Positions Of The Innovative Company Construction Essay

Published:

This essay has been submitted by a student. This is not an example of the work written by our professional essay writers.

My objective is to obtain a challenging position with a dynamic and innovative company that will be able to capitalize on my technical and commercial expertise, project management capabilities and proven customer relation skills to facilitate the growth mandates of the organization.

Highlights of Qualifications

Over ten years of progressive experience in engineering design within the Mechanical field

Thermodynamics, Heat Transfer, Heat Exchanger design (Various Types) ; HTRI, CFD, Hydro-power, Renewable Energy Technologies, Wave Power; Wind Energy; PhotoVoltaics; Biomass, Ventilation & Air, Conditioning; LEED design, AHRAE & CIBSE, Critical Analysis & Research, Energy Statistics & Economics, Energy Conversion & Conservation Technologies, Energy Efficiency, Technology Forecasting, Environmental, Impact Assessment, Building Energy Management; Energy Audits;, Demand Management & Energy Storage

Well versed in conducting audits of manufacturing processes and recommending improvements accordingly

Providing effective solutions or alternatives focused on streamlining Sales Order Management (SOM) processes

Proven ability to interact with clients and build productive and cooperative relations

Analytical and creative professional that is equally comfortable working in a team setting or independently with minimal supervision and guidance

Professional Skills and Experience

October 2006 to March 2010 Regional Technical Sales Support Engineer, Oil & Gas/Energy

SPX - APV Ltd. (U.A.E)

Held roles of progressive responsibility and in various geographic locations for Invensys - APV, beginning with Thermal Design Engineer (Heat Transfer - UK), Project Engineer (Heat Transfer - Denmark), Proposals Engineer (Heat Transfer - Germany), up to the role of Regional Sales Technical Support Engineer with the newly merged entity SPX-APV at their Dubai, UAE location, responsible for the Middle East market.

Reporting to the Sales Support Manager and Site Leader, played an integral role in supporting the sales and growth objectives of the organization in designing and troubleshooting the development of heat exchanger for a varied client base covering the entire Middle East.

Directly responsible for managing all sales of after market parts for the industrial Oil & Gas sector in the Middle East.

Liaised with clients and sales team to facilitate project initiatives by providing technical and commercial support, as well as necessary training to successfully implement and operate heat exchanger applications for both onshore and offshore.

Provided guidance and direct input to the business development team in preparing formal bids and bid documents for major tenders, including the review of techno-commercial requirements with the strategic business units and legal department.

Directly responsible for all aspects of the design of heat exchangers, including customizing specifications and performance in accordance to the requirements of the project.

Consulted with business development and clients to advice on the specification requirements of design, constructing, integrating and operating of heat exchangers to ensure optimization of output.

Proficient in multiple design and project management applications, Lotus Notes, Winquote and SAPv640.

January 2006 to October 2006 Design Manager, Industrial,

NGR Ltd. (contract-UK)

Contracted to review, assess and determine necessary improvements - efficiencies, safety, and productivity - on existing equipment for piling construction.

Directly responsible for all aspects of bringing the new equipment to market - construction of prototype, testing for stress points, setting out full scale equipment specifications, and development of commissioning and safety protocols - under strict budgetary requirements and timelines.

Worked closely with principals of the organization to develop conceptual designs of equipment for patent applications which have subsequently been issued and currently remain in effect.

January 2005 to December 2005 Mechanical Design Engineer,

Inox-Industries, Inc. (Canada)

Reporting to the Chief Engineer & Design Manager, was directly responsible for managing all aspects relating to the design of the company's core product, stainless steel vessels.

Generated stainless steel vessel designs in accordance to ASME Code using 3D CAD, as well as prepared detailed assembly drawings, BOM (using MS Access), weldments and weld maps.

Liaised with third party contractors to develop manufacturing methods for vessel fabrication to ensure compliance with design specifications and output requirements.

Liaised with clients to provide input and guidance on overall process system design to maximize efficiency of constructed vessels.

Managed all design projects through MS share point, including the creation of manuals and accompanying documentation defining the specifications, maintenance and operation of the vessels.

Exceptional surfacing and variable table driven skills in 3D parametric modeling.

Proficient skills in engineering, design and manufacturing using GD&T; utilizing Solid Edge V15-V18, CadKey97 and AutoCAD.

June 2004 to December 2004 Mechanical Design Engineer/Application Engineer,

Air-O-Mix Systems Inc. /Dry-O-Mix Systems Inc. (Canada)

Reporting to the President and Design Manager, specialized in the design and operation of dehumidification units, a significant product of the company's revenue, covering a wide range of applications of various sizes based on the operating requirements of the client.

Prepared design drawings using Solidworks2004 Pro in accordance with guidelines as outlined in Ashrae (HVAC) books, as well as full perspectives and supporting documents to facilitate the construction, implementation and operation of the specified units.

Compiled and submitted formal project bids to clients, accompanied by full schematic presentations, based on an established understanding of the client's requirements and excellent knowledge of refrigeration cycles processes.

Liaised with clients during the construction and implementation of the units, providing direct feedback on troubleshooting and maintenance requirements to maximize operational efficiency of the units.

Provided guidance and input to clients and internal sales team on structuring the in-house keeping system for Dry-O-Mix to enhance performance.

October 2003 to June 2004 Product Design Engineer,

Future Mobility HealthCare Products, Inc. (Canada)

Under the tutelage of a Professional Engineer of Ontario, specialized in designing healthcare equipment and accessories for wheelchair application.

Designed, prototyped, and tested a Type 1, folding wheelchair to RESNA standards.

Produced detailed drawings for components, parts, assemblies, sub-assemblies, exploded drawings and BOM.

Proficient in 3D modeling using Solid Works 2004 Pro, CADKEY97, Auto-Desk Inventor and AutoCAD2004

Applied FEA tools to simulate complex engineering systems in order to draw values for design intent using COSMOS Xpress.

Generated Parts manuals with full 3D graphics, providing a labelling matrix that is cross linked to part numbers to facilitate the operation and maintenance of the equipment.

Knowledge of aluminum extrusion and sheet metal design, as well as manufacturing processes, designing of jigs, fixtures and tooling for assembly lines.

Generated a final cost analysis for projected designs based on materials, processes and machine requirements.

Education

2010-2011 Heriot Watt University: MSc (Hons) Energy Edinburgh, Scotland, UK

2010 - PMI PMP Certification - Exam Pending International

Heriot Watt University: B.Eng; Mechanical Engineering Edinburgh, Scotland, UK

Kingston University: BTech. (HND) Mechanical Engineering Kingston, England, UK

Kingston College: BTech. (HNC) Mechanical Engineering Kingston, England, UK

Humber College Mechantronics Engineering Etobicoke, ON, Canada

Extracurricular Activities and Other Skills

Member of the ASME (American Association of Mechanical Engineers)

Member of the GradEI ( Energy Institute)

AMIMechE, associate member of the Institution of Mechanical Engineers

Enjoy upgrading skill sets, reading, traveling, golfing, fishing and sports.

References Available Upon Request

Writing Services

Essay Writing
Service

Find out how the very best essay writing service can help you accomplish more and achieve higher marks today.

Assignment Writing Service

From complicated assignments to tricky tasks, our experts can tackle virtually any question thrown at them.

Dissertation Writing Service

A dissertation (also known as a thesis or research project) is probably the most important piece of work for any student! From full dissertations to individual chapters, we’re on hand to support you.

Coursework Writing Service

Our expert qualified writers can help you get your coursework right first time, every time.

Dissertation Proposal Service

The first step to completing a dissertation is to create a proposal that talks about what you wish to do. Our experts can design suitable methodologies - perfect to help you get started with a dissertation.

Report Writing
Service

Reports for any audience. Perfectly structured, professionally written, and tailored to suit your exact requirements.

Essay Skeleton Answer Service

If you’re just looking for some help to get started on an essay, our outline service provides you with a perfect essay plan.

Marking & Proofreading Service

Not sure if your work is hitting the mark? Struggling to get feedback from your lecturer? Our premium marking service was created just for you - get the feedback you deserve now.

Exam Revision
Service

Exams can be one of the most stressful experiences you’ll ever have! Revision is key, and we’re here to help. With custom created revision notes and exam answers, you’ll never feel underprepared again.