This essay has been submitted by a student. This is not an example of the work written by our professional essay writers.
Toyota is a name that when seen brings an image of high quality, durability, cost/fuel efficient and best value for money in the car industry. The reason for such a high standard is that Toyota Production System has Pioneered and Implemented Lean Principles in Production system. These principles didn't have the effect immediately in the start but at the last stages, it proved to have a greater worth for it. By implementation of Lean Theories and Philosophy, Toyota had got rid of much wasteful activities using Just In Time approach.
The understudy report consists of the Implementation of Lean Principles on a Construction Project which was significantly delayed due to lack of managerial qualities. The Client built a new Head office to shift all the activities from the previous offices in to the new one, but a delay to all activities was observed. It has been analyzed that the construction companies fail to give proper time to the initial Pre-Design and Design Phases and are more reluctant towards starting their construction.
The current method of working of the company is mapped and explained with the possible issues and problems are being enlisted. The Design & Build approach of Procurement was appraised and further improvements have been suggested. The second part of the report consists of the major and applicable Lean Principles and how they can be implemented in Construction Projects. This not only reduces the wasteful activities but also prove to be cost efficient as mapped. Lastly some merits of Lean Implementation on the construction project have been enlisted and conclusions are drawn.
NEW HEAD OFFICE OF COMMERCIAL BANK OF KUWAIT (CBK)
The Commercial Bank of Kuwait is a well known Bank in Kuwait having its roots back in 1960's. It began with a simple minded policy from just a small part of the property with the aim to handle the financial burden on the main bank of Kuwait; the National Bank of Kuwait. Being an old player in the country, the CBK decided to shift its old head office to the new location as the old building had many issues like less working space creating hurdles in modernizing the banking facilities. The old office was in the region of Maidan Hawally which is considerably famous for foreigners living in the region. The new head office of CBK is in the Centre of Kuwait i.e. Kuwait City which is the economic hub of overall State of Kuwait. In this project, Commercial Bank of Kuwait was the main funding source. The Project began in January 2007 and the construction of the Bank lasted till March 2009. Although the project was expected to be completed by June 2008 whereas only the construction phase had just finished till March 2009 and the final building being handed over by September 2009. The study of the project indicated that the Project was not only delayed yet was significantly over budgeted. The Project was approximately 30 % over budget and 15 months delayed. Moreover not only these issues affected the project but too many changes by the client were also a reason for the delay.
The delay in the completion of the CBK Project was due to two reasons. One being that the Chief Executive Officer of the CBK resigned due to some personal issues with Managing Director of the Bank and the other reason was due to the Financial Crunch throughout the globe. These two reasons caused changes in the project after a long halt to the construction till the new CEO was assigned as the requirements of the project were altered accordingly. Therefore only one person cannot be held responsible for the overall delay caused in the CBK Project.
According to Tucker (1998), a high level of management in Construction is very much essential for smooth flow of project. Thus it can be said that there were flaws in the design phase of the project and the lack of good management resulted in overall failed on-time delivery of the project. The Procurement method of the project was Design - Build keeping in view the needs and outcomes of the project. The Client (CBK itself) had future plans for further development which all seemed to be left in vain of further initiation due to such a mess created. There fore the Client took keen interest to map the overall processes of the project in order to learn the flaws that delayed the Project so as to further smoothen up its activities.
Working Philosophy in the CBK Project
Being appointed as an Assistant Project Manager by the Client (Commercial Bank of Kuwait), the task allocated was to analyze the overall performance of the CBK Headquarters project and prepare a report to learn the flaws and outcomes of the project. Such an exercise was done in order to generate preventive measures so that future projects may not be delayed much.
The report consists of a comprehensive analysis of methodology used for the Development of Headquarter of CBK and the maximum emphasize is given to the changes in the design i.e. the overall management of the design. The first step taken into consideration is the feasibility report or the outline of the project which is the first process in a project. A detailed approach in investigation is taken therefore, the Contractor (Ahmadiah Contracting-Kuwait), the team of Client (CBK), stakeholders and other parties involved in the project were consulted. All the processes are shown are Appendix - 1.
Method of Procurement
The method of procurement in this project was Design and Build. It is very much necessary to understand what this approach is by analyzing the method. From the client's point of view, the success of the project is nearly decided by choosing appropriate method of procurement in the beginning. The common layout of the system can be seen in the figure below.
Fig.1 - Typical Arrangement of Design & Build Procurement method
Fig.2 - Arrangement of Team in CBK Project
Fig.2 indicates that this system is very much suited for clients who typically pass their risk to the contractor and a close coordination is developed between the design and the contractor team. This enables to synchronize the time, cost and quality of the project in the true sense of good project management perspective. As the cost is pretty much decided in the beginning, the client is confident that all the further process is smoothen up. But the point to be concerned is that all teams should have proper knowledge of design and build approach. Mostly clients which have Design Build approach new into their project end up with the sentence that the contractor has made a lot of money out of this project. This can be true only if the client finds that the things mentioned in the proposal are not same as they should have been. According to Morledge et.al (2006), client should be in notice that:
Design and Build method may change the formal aspect of most of the parties involved throughout the project.
The contractual accountability of the involved parties can change according to the environment and need of the project.
Therefore according to Morledge et.al (2006), the client should study the procurement route to be selected from the technical, financial and legal angle, well in advance before the commencement of the bidding stage. By this not only the client but also the other stakeholders involved in the project can proceed safely which having loose much money.
From the explained context it can be seen that before initiating any step into the start of the project, if the client spends some time in understanding the possible pros and cons of the selection of procurement method, much discrepancies can be tackled easily. Moreover, the early involvement of the clients design team can lend a helping hand to the client in correct decision making. This type of activity seems to be very scarce in the CBK Project.
Processes of CBK Project
The working of the CBK Project can be seen in the form of a process map with each activity corresponding to a task. It can be seen that the working standard of the overall project is in the form of a three phase Design & Build method. The three phases can be as:
The three phases of the project are mapped as processes and sub processes and the roles of different parties involved in the overall project are elaborated (Appendix -1). This exercise enables to understand the whole process easily.
Detailed Analysis of Processes
The main processes of the New Headquarters of Commercial Bank of Kuwait are discussed as follows:
Concept of the Project
The Chief Executive of Commercial Bank of Kuwait had a vision towards modernization in the country and the Bank it self. Therefore in order to compete the competitive banks in Kuwait the decision was taken to develop a state of the art building which will serve as an headquarter and economic backbone for the organization. Modernization was in the sense that latest high performance computers with ultra high-tech security were to be operated in the building.
The Commercial Bank of Kuwait being the client as well as the funding authority finalized the concept of the project in order to have a brief overview of required budget of the project. For this, closed group meetings and seminars were arranged in order to clear any queries in the mind of the staff of the bank.
The top management of the Commercial Bank of Kuwait was keen to modernize its new headquarters. For this to happen, special sessions were arranged in collaboration with Ministry of Planning, Kuwait and State Bank of Kuwait. International Banks like Barclays and HSBC were taken as role model and one model being finalized for the future development. This was a good step as to bring Western standards into an Arab Country.
The consultant team (Al-Injaz Architects and Engineers) selected by the client was through competition and the team selected was an experienced one in modern construction.
A feasibility report was made in order to study the potential outcomes of the project and what could be the difficulties faced by the teams.
Integrating Clients Objective
The Consultant team enlisted the requirements of the client and steps were taken to meet the client's goals. Mainly the client's focus was a state of the art modern building and the whole project to be finished quickly without compromising Quality Standards. Therefore quality standards were also a must for the client. Through critical analysis of the data, the consultant team came out with the Design & Build approach of procurement.
The consultant team started their work in the perspective of Design & Build approach so that the tendering process can take place on time. Initial plan setup, architectural designs along with structural designs, cost estimation; all were done right on time.
The Projects brief long with all the details of the project including deadline of the project, estimated cost, drawings and plan etc are documented.
The first document review meeting was held in which the top management of the CBK took part. All the project documents were critically analyzed and the Chief Executive and Chairman of Commercial Bank of Kuwait were briefed by the Project Manager about the findings of the report. It was decided that the design of the bank was little more luxurious as per the standard set and was exceeding the budget. So minor changes were made and final documents were setup.
After finalizing the Project documents, pre-qualification of contractors was done and tenders were called for the development of New Headquarters of Commercial Bank of Kuwait. This was done by the Bidding Committee assigned by the Client which was in close contact with the client during the tendering process.
Confidential bidding documents were received before the deadline and handed over to the client.
The client selected the contractor with the lowest bid and consulted the consultant team and the project management team in order to approve the bid. Upon the approval from the teams, the client approved the Contractor (Ahmadiah Contracting, Kuwait) and informed the bidding committee.
The Bidding Committee arranged a contract signing session in which the contract was signed between the two parties. It was assured that the detailed design would start immediately and the project would be finished on time and in budget.
The design team of the Contractor (Ahmadiah) started the initial design of the development of New Headquarters of Commercial Bank of Kuwait. The consultant team and the project manager of the client were also involved in this phase and regular meetings with the client were taking place. During this phase proper site survey and investigation was done and the design aspects were altered accordingly.
The interior designing of the CBK was given much more importance in order to meet the quality standards set by the client. The other reason was to meet the maximum security levels of the requirements of the project.
Provision for restaurant
In order to serve the employees of the CBK, it was mentioned in the objectives of the client to provide the catering service to the staff so that at lunch time, the staff can enjoy the atmosphere and have a chat and meeting at the same time along with lunch.
After finalizing the initial design of the CBK, a design proposal was prepared along with the time and cost estimates for approval from the Client.
The client, consultant team and the project manager set up a meeting in order to critically analyze the proposal and upon approval from the client, the contractor proceeds further.
Final Design & Plan Layout
Once the proposal was finalized, the design team of the contractor started to work on the detailed and comprehensive design of the project. The HVAC, electrical works, the building services including CCTV arrangements, the infrastructure of the building, all were done according to the sub-contractors co-ordination. The final layout of what is to be developed appeared on drawing charts and Auto-Cad drawing were prepared.
The Step wise proceedings of the design phase of the CBK project starting from the Client's input and ending at the Contractor's output can be seen in the Fig.3.
With slight alterations in design and requirement by the client, the contract was review and the construction phase was to be started.
The first step of the construction phase was the site acquisition, construction of temporary offices for the staff as well as design team. For this to happen the sub-contractors were put on job and the heavy construction machinery was brought on site.
Final Drawings Implemented on Site
With the start of working on the construction site, the first step was to excavate the area to be constructed upon. The construction phase started to be as smooth as predicted.
Time & Quality Checks
The project manager of the client (CBK) had frequent visits to the site which resulted in strict control over the time and quality issues. A few incidents took place in which the contractor was not up to the mark as stated in the detailed drawing specifications. For instance, the project manager managed to have a look at the steel standards adopted and found that in the beams, low quality steel was used and was further sent for testing in the laboratory.
The overall view of the working of the teams in the CBK Project can be seen in Fig.3.
Fig.3 - The Overall Design Phases of CBK Project
Documentation and Review
A very important aspect of the CBK project was that every thing was documented and latest computer software such as Primavera was used on the site. The Client's project manager had an access to it. Some clashes went up due to delay in the project beyond the critical path which was referred to the client.
Possible Issues with the Current Method of Working
Different types of issues arose during the project life cycle that lead to certain unexpected failures during the project. Following table enlists the main issues:
Effect on Project
Client's lack of knowledge about Design & Build Procurement method
Being the centre of focus of the overall project, the Design & Build method was not clear to the client. The client wanted to include some aesthetic aspects into the building which were technically unable to be employed in the Design Build method resulting in some misunderstandings.
The client had fixed the budget of the CBK Project. This resulted in many changes and the design build team had to work accordingly.
Un-necessary obstructions caused many delays through the project.
Late design proposal by the client's consultants
Late approval by the top management of client.
Delay in Tendering
Too much consultation with the finance department and the stakeholders.
One of the major flaws found during the project life cycle was the lack of understanding between the parties involved in the project. The client's design team (Al-Injaz) and the contractor's design team had some misunderstandings which were later on rectified by meetings.
On the other hand, the contractor had some issues with the electrical works and the plastering sub-contractors. Both the sub-contractors were required to work just after five stories were finished but they joined quite later which created a dispute amongst them.
As mentioned that the client (CBK) was new with Design & Build approach, so he suffered this with regards to the quality issues concerned. The client had certain standards kept in mind which later-on were lacking during construction. Therefore, to rectify them the client had to may extensive amount to the contractor.
As earlier mentioned, the Chief Executive of the CBK resigned due to unknown reasons and there was a lack of willingness developed amongst the top management. The new CEO appointed had to take the charge of the project. Being a new comer, he tried to make few changes, which had to be followed and ended up with increase in cost of the project.
Unfortunately, during the project, the world's market was hit by a downfall and all the banks halted their work. The client being a Bank itself had to respond accordingly resulting in an excess of 6 months delay in the project.
Increased Cost of Rental Machinery
As the project was significantly delayed, the effect of increased cost was also in the form of rental machinery. This was solely the contractor's responsibility but due to the nature developed on the site, the contractor succeeded in getting some amount from the client.
Table 1: Issues found during project life-cycle of CBK Project.
The above mentioned issues were found to have a significant impact on the working of the CBK project. The need of the future and to be successful in the field of construction is by analyzing the short comings of previously done processes. To enhance the working and construction processes by the client in the future, the forth coming recommendations in the form of Lean perspective in construction have been defined. All the working can be seen in Appendix -1.
ENHANCED WAY OF HANDLING COMMERCIAL BANK OF KUWAIT PROJECT
Introduction to Lean
According to Egan (1998) and Latham (1994), the construction industry has changed significantly in the past decade, especially the UK's construction industry. Much emphasis is now given to improve the construction industry by analysis the working methodology of the industry. By analyzing, one can rectify the short comings and further improve that to make a win-win situation. According to Koskela (1997), construction industry cannot be a regarded as a "rich cultured" industry, because the way of doing work, the procedures and outcomes are nearly same as they were years ago. To improve this, the construction industry had to be linked with production and manufacturing industry. The reason is that although the end product of both the industries is entirely different, yet if the working principles of both industries are studied, they can be regarded as identical.
According to Egbu (2010) and Towill (1997), construction industry can be regarded as a manufacturing industry. If we look at the production or manufacturing industry, for instance a car industry, the end product is a car, which was the project of the factory (Muhlemann et al., 1992). In construction industry, the end product is a building, house, a dam etc, which is the project for the construction factory/industry. Taking this, approach, Koskela (2000) introduced Lean principles in construction industry's perspective. He argued that the manufacturing industry has set of production theories which when applied to the construction industry, the results can be significant. When seen the time-line of the car manufacturing industry, for instance, we can see that the car manufacturing has changed drastically over the past century. The reason being that the working principles adopted by production industry has polished itself over time again and again, when such principle be defined and implemented on construction industry, the end product can be enhanced (Koskela, 1992).
Lean thinking is the concept put forward by Womack and Daniel (1996) in which he describes to think every possible aspect in a leaner way. Thus by minimizing single repetitive step can be a step forward towards implementing lean in our daily life. Lean production system was adopted and implemented by Toyota Production System through out it's time-line of production activities. Liker (1998) recognizes Toyota as the pioneers of lean principles which have brought a revolution in its production activities for more than a century. This is done by proper planning the supply chain activities, minimizing the wasteful activities, etc. By the introduction of 5S technique, Kanban and others, Toyota has flourished significantly in the production industry, whereas, the construction industry is far away from these concepts. Summary of 14 points as set by Toyota Production System and enlisted by Liker (2004), are as follows:
Base Your Management Decisions on a Long-Term Philosophy, Even at the Expense of Short-Term Financial Goals.
Create Continuous Process Flow to Bring Problems to the Surface.
Use "Pull" System to Avoid Overproduction.
Level Out the Workload (Heijunka).
Build a Culture of Stopping to Fix Problems, to Get Quality Right for the First Time.
Standardizes Tasks are the Foundation for Continuous Improvement and Employee Empowerment.
Use Visual Controls so no Problems are Hidden.
Use Only Reliable, Thoroughly Tested Technology That Serves your People and Processes.
Grow Leaders who Thoroughly Understand the Work, Live the Philosophy, and Take it to Others.
Develop Exceptional People and Teams who Follow your Company's Philosophy.
Respect Your Extended Network of Partners and Suppliers by Challenging Them and Helping them Improve.
Go and See for Yourself to Thoroughly Understand the Situation (Genchi Genbutsu).
Make Decisions Slowly by Consensus, Thoroughly Considering All options; Implement Decisions Rapidly (Nemawashi).
Become a Learning Organization Through Relentless Reflection (Hansei) and Continuous Improvement (Kaizen).
Thus by closely looking and understanding the above mentioned principles, we can judge that how successful a company can be when adopted such principles. By using Kanban, much of the waste can be removed. The fact is to carefully see and analyse the company performance and take out the shortcomings.
Integrating Lean with the CBK Project
Construction industry is now in a phase of adapting new procedures and methods for its improvement and to increase its efficiency. This can easily be done by integrating lean philosophy in the construction industry (Jorgensen and Emmitt, 2008 & 2009). Liker (2004) has condensed the above enlisted 14 key principles of Toyota Production System into 4 main categories/sections according to their nature. These are:
Selection of Right Process
People and Parners development can lead to value generation
Gradually problem solving
These 14 points of Toyota Production System are very well condensed in the above mentioned four points. When thinking about construction, Long-term philosophy can very much help in implementation of lean principles. According to Arbulu and Zabelle (2006), to standardize work it is very much necessary to follow a guideline. The five stages vision, skills, incentives, resources and action plan can be idealized according to the CBK Project. Thinking Lean while keeping in view these 5 stages can very well prove to be successful in the project.
Defining a vision is the first step towards the start of a project. These not only assist in the further journey, but also remove any questions that may arise in the overall team in the project. This exercise was found to be completely during the construction of New Head office of Central Bank of Kuwait Project because everything was mixed and jumbled up during the last stages of the project. Defining a vision thus give a road map towards success and the vision is usually giving for the next couple of years, which elaborates the broad thing of the company in front of others. Only thing that matters is the top management team to be strong to take decisions which lacked through out the CBK Project.
Skills come first after a vision is set. In fact a vision cannot be defined without the proper knowledge of the skills that a company possesses. In order to be successful in implementation of Lean in the construction industry, the company has to design or upgrade its staff development program. Thus skills very much distinguishes between the current adopted working methodology with the new working method i.e.; Lean. Furthermore, proper knowledge of the companies profile is also very beneficial in perusing successful projects. Although the staff of the CBK Project is very much skilled yet some lack in understanding of basics in construction industry is found, for instance the top management dealing first time with the Design & Build procurement method.
Incentives are good in the sense that they keep the workers at work motivated. The incentives can be in the form of money or by applauding someone's good work, this make the worker feel happing. To implement lean into the construction industry is something to make a great change into the system, thus by introducing incentives can encourage workers at work and be happy to work and accept the change.
Resources can be regarded as the backbone of a project. Insufficient resources and funds may load to a halt during a project. In order to smoothen the working and progress of the project, it should be made assure well in advance that there are enough funds to support the working. The financial crunch appeared during the construction of the CBK project which significantly halted the progress of construction activities.
Like setting up a clear vision right in the start of the project, a good action plan is also equally important as a right action plan sets up guidelines for the project team. Working on the correct action plan, incorporates any unsubstantial changes and alterations in a project. A good action plan cannot be seen in the CBK project which lead to some unwanted results in the last stages of the project.
Improvement by Implementation of Lean Principles
The 14 principles of Lean Production system used by Toyota Production System and stated by Liker (2004) are being implemented into the CBK Project which gives a more Leaner and good value of money look to the project. Not only the cost of the overall project is properly utilized but also it is a quicker approach Womack and Daniel (2005). The enlisted problems in the CBK Project (as stated in the start) can be resolved using the Lean Principles. Following are the Lean principles directly implemented to the improvement of CBK Project.
The long term philosophy in the context of lean can be explained as:
Base Your Management Decisions on Long-Term Philosophy
Long term philosophy gives a plate form for an organization to initialize the start of future prospects. Long term approaches are usually declared in the form of upcoming 5, 10, 15 or 20 years in which it is clearly briefed about the future plans of the organization. Commercial Bank of Kuwait should introduce this approach right from the start of future projects. This will enhance the managerial skills of the organization and an approach to solve all the problems will be upgraded (Carroll, 2002) and hence shown in Fig.4 after application.
Fig. 4: Tentative Flow Chart of the Working Methodology using Lean Principles
The process improvement section of the Lean principles consists of following aspects:
Create Continuous Process Flow to Bring Problems to the Surface
This principle of Lean suggests that the working criteria of the company should be such that it is running smoothly, fast and in an accurate manner. In this way any problem that arises during the process, may be handled quite easily. This principle can be implemented in the design and the planning phase as it removes many problems which are caused by starting different activities at same time.
Such exercise was completely missing in the CBK Project. Multiple tasks were started at the same time, which lead to misunderstandings in the project. Smooth flow of work was least found and by implementing this technique the smooth flow of work can be seen.
Use "Pull" System
Pull system helps to reduce the un-necessary work that is done during the project. The use of pull system can be used in the pre-project and pre-construction phases during the design phases as this will help to control the time lapsed between the completion of the drawings and the designing.
Un-necessary meetings and suggestions were found during the execution of the Pre-Tender phase whose burden, the overall project planning had to face. By introducing Pull system, much waste full activities can be overcome.
Level out the Workload
The workers at work shouldn't be overburdened at any time of the project. This not only applies to the Labor but also to the Design Team. When it comes to the labor, it should be taken care off that every labor has equal work allocated to him and work load should be calculated according to the time available. Similarly the Design team should be allocated enough time to finish their job, there should not be any instances that a timeframe is given to the team and suddenly the client orders to wind up the design and hand it over. Such non-professional attitude may lead to unwanted results.
Leveled workload cannot be seen during the CBK project which caused excess workload on the design team. Proper planning and implementation techniques should be followed as suggested in Appendix
Build a Culture of Stopping to Fix Problems, to Get Quality Right the First Time
Indeed a very good principle, that such a culture be developed in the company that insists people to proceed further with their work only when an un-resolved issue is resolved. Such a technique can be implemented by Commercial Bank of Kuwait in the future projects. When an error is detected in the Design Phase of the project, it should be immediately reported to the Head of Structural Engineering department and properly corrected so that the error doesn't multiply till the final stage.
Such a fault can be found in the CBK Project when the contractor and sub-contractor had a clash between them. The electrical works sub-contractor was told well in advance about the fault that is caused in the wiring of the building which made the lighting system of the building trip. Due to the laziness and pending nature of sub-contractor, all the other works needed to be stopped until the electricity was fixed. By introducing this lean principle, the system appears to smoothen up.
Use Visual Control So No Problems are Hidden
This technique promotes the usage of visual tools to see that any problem may not be left over. Such exercise can be in the form of using Planning software, Auto-CAD, 3d modeling tools, BIM etc. Such tools map out the project keeping in view any delay that is pre-defined as a factor of safety.
In the CBK Project only traditional tool like Primavera was used which was not completely followed, resulting in delays and problems was left till the later stage of the project. Visual Control in the form of early mergence of Consultant Team in the CBK Project has been suggested. This gives early warning and response to the Top management of anything not going on track.
People and Partners Development
The People and Partners development section of Lean Principles consists of following:
Respect Your Extended Network of Partners and Suppliers by Challenging Them and Helping Them Improve
This technique gives a very good concept of partnership and its aftereffects. By keeping good relations with the working partners and companies, one has a good level of confidentiality throughout the Project. Partnering relation is not only valid to one project only; in fact after completion of one project, one can re-establish their relation ships (Matthews et al., 2000). In this case a person observing a short coming in others works immediately report them and help them to improve it. For example if supply of steel is not of high standard, it is reported and improved.
This exercise is being demonstrated in the form of Team development in the suggested map with lean principles. Such team development promotes the good working features and healthy ideas can be generated.
The forth section; Continuous Improvement section of lean principles consists of:
Go and See for Yourself to Thoroughly Understand the Situation.
According to this Lean principle, it is a good and healthy approach to go on the spot of work and see how the work is being progressed. It is a convention in Middle-Eastern countries that the client feels that it would go against the power and position of the CEO or the Top Management of the client to physically visit the site of construction. But this convention needs to be discarded in order to proceed further.
This Principle of Lean is very much applicable to the CBK Project as the main cause of the delay and a non-managerial approach towards the project was due to un-attendance of the client. Although in the Design & Build approach, client transfers all the risk to the contractor to do the construction and due to the lack of experience of the client, this approach was misunderstood and only the Project Manager was reporting to the Client. This nature of doing works needs to be changed and the new effective map suggests a smooth and easy yet competitive path towards success of a project.
Make Decisions Slowly by Consensus, Thoroughly Considering All Options
Make slow but technical and implementable decisions are very much required during the project. This can even be done in the Pre-Planning and Planning stages as much of the thinking work is involved in these phases. The Client should consult its consultants team and expertise to enquire about a task before finally implementing it.
Slow yet correct decisions were found completely lacking in the CBK Project. The reason was that the client was new with the Design, Build approach and due to the nature of the Top Management, completely lacking the Go See for Yourself approach, didn't bother to consult other experienced personals who had previously used the Design Build Approach during their projects. Due to this the decisions were slow; quite slow yet not up to the standard towards smooth running of the project. The map with Lean implementation gives a smooth plat form of the pre-design (pre-project) stage which incorporates this Lean principle.
Overview of Current Processes by Using Lean Principles
The problems that were found during the CBK project were enlisted in the first half of the report. These problems were critically analyzed and new recommendations in the form of adaption of lean principles were appraised. By implementing Lean principles, the proposed Process map has been generated, which illustrates a smooth process without forming any wasteful activity as was observed during the CBK Project and thus collaborates with the study done by Al-Sudairi (2007).
The Initial Planning stage has been sub-processed to illustrate the Lean Concept applied in this stage. When looking at the current method of working, many concurrent phases were taking place, but the Lean perspective changed the working methodology and new proposed process map (Appendix - 2 & 3) offers a new concept for the construction industry.
Furthermore, the initial design and the detailed drawing phases are deeply studied and by implementation of Lean principles, a new process map has been generated. This overcomes the excessive waiting and un-timed meetings amongst the design teams, client and the contractor. A philosophy of Lean Production of JIT (Just-in-Time), which has been regarded as a waste removing activity by Schonberger (1982) and Monden (1998), has been followed at different phases of the map generation. By implementing this philosophy, much of the wasteful activities are taken care of. Moreover much precious time and money is saved.
The new Process map (Appendix -2) and working method has been integrated into Lean principles as used in the production industry. The working has been divided into the Pre-Design, Design and Production activities which in terms of construction industry are Pre-Project, Pre-Construction and Construction activities. These series of processes and steps are well planned according to the lean principles. Much emphasis is given on the design phases to minimize the changes later-on which cause a possible halt to the construction activities and thus disturb the project phases as per planned. The design phase can be considered as the backbone towards the success of the project (Gray and Hughes, 2001) that is why the Lean principle of "Build a Culture of Stopping to Fix Problems, to Get Quality Right the First Time" has extensively being used along with the design team's and the top management's involvement throughout this process (detailed in Appendix 2 & 3).
Merits of Implementation of Lean
By implementation of Lean principles, following merits can be drawn:
Wasteful activities are found to be completely diminished through out the project life-cycle. The redo work and extra transportation activities have been minimized. It is made compulsory that any thing that is desired on site be ordered right before time it has to be used. Thus it saves the extra transportation, handling and the storage cost and further minimizes the wasteful activities that are commonly observed during construction projects.
Time Factor is the first thing to be noted after implementation of lean philosophy. Much time is reduced as all the wasteful activities have been drawn out of the implementation phases.
Cost Factor is found have a significant impact on overall project. Much of the cost has been reduced by minimizing the wasteful and non-value adding activities. Less cost, more standard and quality is generated indicating best value for money and a win-win approach towards the end of the project. The financial goal is reached right on time and up-to the desired mark.
The new process map appears to be much refined and straight forward without inter-mixing with other activities. This appears to be transparent approach, much use-friendly and cost effective approach.
The pull system is a new philosophy and is very good in saving costs and reducing waste. Only that much material is available on site that is needed.
In fact Lean Construction has a broader spectrum when applicable to the projects, in the beginning these philosophies may not seem to be applicable, but once started, the results are excellent.
The miraculous popularity and durability of Toyota Motors has proved their mettle throughout the world. No single industry can claim to be ahead of them, when it comes to the pioneers of Lean Production System. The philosophies induced in the Toyota Production System are taken out and introduced into the construction industry. The practice has proved to be very successful as the major unwanted factors in the construction industry i.e.; Time, Cost and Quality have successfully being implemented without any unwanted results due to integration of Lean principles. The philosophy like Just In Time and Pull system are very simple to use and optimize by just increasing the level of good management skills (Waller, 2003). Although the implementation of Lean in the Non-Production industry like construction industry, may be difficult in the start as people find difficult to bring about change in their working routine. But by giving Incentives in the form of applauds and bonuses, keeps the workers and people motivated and ready to work. Though the initial stages of implementation are difficult to handle but comparing with the end results, the initial pain of work is far more less. Once a standardized approach is set, then the changes would be minimized and the level of maximum benefit would be setup and fixed. The Lean principles therefore prove to be very beneficial in the construction industry and much wasteful activities in construction industry are controlled.