Efficiency Of Production Depends Computer Science Essay

Published:

INTRODUCTION

The efficiency of production depends on how well the various machines; production facilities and employee's amenities are located in a plant. Only the properly laid out plant can ensure the smooth and rapid movement of material, from the raw material stage to the end product stage. Plant layout encompasses new layout as well as improvement in the existing layout.

It may be defined as a technique of locating machines, processes and plant services within the factory so as to achieve the right quantity and quality of output at the lowest possible cost of manufacturing. It involves a judicious arrangement of production facilities so that workflow is direct. 

A plant layout refers to the arrangement of machinery, equipment and other industrial facilities- such as receiving and shipping departments, tool rooms, maintainencerooms and employee aminities -for the purpose of acheiving the quickest and smoothest production at the least cost. The subject of plant layout not only covers the initial layout of machines and other facilities but encompasss improvement in, or revisions of, the existing layout in the light of subsequent developments in the method of production. In other words, a plant layout is a floor plan for determining and arranging the desired machinery and equipment of a palnt, whether established or contemplated, in the one best place to permit the quickest flow of material at the lowest cost and with the least amount of handling in processing the product from the receipt of the raw materials to the shipment of the finished products.

Lady using a tablet
Lady using a tablet

Professional

Essay Writers

Lady Using Tablet

Get your grade
or your money back

using our Essay Writing Service!

Essay Writing Service

The improvements in layouts already in use in order to introduce new methods and improvements in manufacturing procedures."

In other words, Plant layout refers to the arrangement of physical facilities such as machinery, equipment, furniture etc. with in the factory building in such a manner so as to have quickest flow of material at the lowest cost and with the least amount of handling in processing the product from the receipt of material to the shipment of the finished product.

OBJECTIVES OF A GOOD LAYOUT

Any of the following objectives might be acheived through a good layout:

Provide enough production capacity

Reduce material handling costs

Reduce congestion that impedes the movement of people or material

Reduce hazards to personnel

Utilize labour efficiently

Increase employee morale

Reduce accidents

Utilize available space efficiently and effectively

Provide for volume and product flexibility

Provide ease of supervision

Facilitate co-ordination and face-to-face communication where appropriate

Provide for employee safety and health

Allow ease of maintainence

Allow high machine/equipment utilisation

Improve productivity

IMPORTANCE

Plant layout is an important decision as it represents long-term commitment. An ideal plant layout should provide the optimum relationship among output, floor area and manufacturing process. It facilitates the production process, minimizes material handling, time and cost, and allows flexibility of operations, easy production flow, makes economic use of the building, promotes effective utilization of manpower, and provides for employee's convenience, safety,

comfort at work, maximum exposure to natural light and ventilation. It is also  important because it affects the flow of material and processes, labour efficiency, supervision and control, use of space and expansion possibilities etc.

ESSENTIALS

An efficient plant layout is one that can be instrumental in achieving the following objectives:

a) Proper and efficient utilization of available floor space

b) To ensure that work proceeds from one point to another point without any delay

c) Provide enough production capacity.

d) Reduce material handling costs

e) Reduce hazards to personnel

f) Utilise labour efficiently

g) Increase employee morale

h) Reduce accidents

i) Provide for volume and product flexibility

j) Provide ease of supervision and control

k) Provide for employee safety and health

l) Allow ease of maintenance

m) Allow high machine or equipment utilization

n) Improve productivity

TYPES OF LAYOUT

As discussed so far the plant layout facilitates the arrangement of machines, equipment and other physical facilities in a planned manner within the factory premises. An entrepreneur must possess an expertise to lay down a proper layout for new or existing plants. It differs from plant to plant, from location to location and from industry to industry. But the basic principles governing plant layout are more or less same.

Lady using a tablet
Lady using a tablet

Comprehensive

Writing Services

Lady Using Tablet

Plagiarism-free
Always on Time

Marked to Standard

Order Now

As far as small business is concerned, it requires a smaller area or space and can be located in any kind of building as long as the space is available and it is convenient. Plant layout for Small Scale business is closely linked with the factory building and built up area.

From the point of view of plant layout, we can classify business or unit into three categories:

1. Manufacturing units

2. Traders

3. Service Establishments 

1. Manufacturing units

In case of manufacturing unit, plant layout may be of four types:

(a) Product or line layout:

Under this, machines and equipments are arranged in one line depending upon the sequence of operations required for the product. The materials move form one workstation to another sequentially without any backtracking or deviation. Under this, machines are grouped in one sequence. Therefore materials are fed into the first machine and finished goods travel automatically from machine to machine, the output of one machine becoming input of the next, e.g. in a paper mill, bamboos are fed into the machine at one end and paper comes out at the other end.

The raw material moves very fast from one workstation to other stations with a minimum work in progress storage and material handling.

The grouping of machines should be done keeping in mind the following general principles.

a) All the machine tools or other items of equipments must be placed at the point demanded by the sequence of operations

b) There should no points where one line crossed another line.

c) Materials may be fed where they are required for assembly but not necessarily

at one point.

d) All the operations including assembly, testing packing must be included in the

line 

Advantages: Product layout provides the following benefits:

a) Low cost of material handling, due to straight and short route and absence of backtracking 

b) Smooth and uninterrupted operations

c) Continuous flow of work

d) Lesser investment in inventory and work in progress

e) Optimum use of floor space

f) Shorter processing time or quicker output

g) Less congestion of work in the process

h) Simple and effective inspection of work and simplified production control

i) Lower cost of manufacturing per unit

Disadvantages: Product layout suffers from following drawbacks:

a. High initial capital investment in special purpose machine

b. Heavy overhead charges

c. Breakdown of one machine will hamper the whole production process

d. Lesser flexibility as specially laid out for particular product.

Suitability: Product layout is useful under following conditions:

1) Mass production of standardized products

2) Simple and repetitive manufacturing process

3) Operation time for different process is more or less equal

4) Reasonably stable demand for the product

5) Continuous supply of materials

Therefore, the manufacturing units involving continuous manufacturing process,

producing few standardized products continuously on the firm's own specifications and in anticipation of sales would prefer product layout e.g.

chemicals, sugar, paper, rubber, refineries, cement, automobiles, food processing

and electronics etc. 

(b) Process layout:

In this type of layout machines of a similar type are arranged together at one place.

E.g. Machines performing drilling operations are arranged in the drilling

department, machines performing casting operations be grouped in the casting

department. Therefore the machines are installed in the plants, which follow the

process layout.

Hence, such layouts typically have drilling department, milling department, welding department, heating department and painting department etc. The process

or functional layout is followed from historical period. It evolved from the handicraft method of production. The work has to be alloca ted to each

department in such a way that no machines are chosen to do as many different job

as possible i.e. the emphasis is on general purpose machine.

The grouping of machines according to the process has to be done keeping in mind the following principles

a) The distance between departments should be as short as possible for avoiding

long distance movement of materials

Lady using a tablet
Lady using a tablet

This Essay is

a Student's Work

Lady Using Tablet

This essay has been submitted by a student. This is not an example of the work written by our professional essay writers.

Examples of our work

b) The departments should be in sequence of operations

c) The arrangement should be convenient for inspection and supervision

Advantages: Process layout provides the following benefits

a) Lower initial capital investment in machines and equipments. There is high

degree of machine utilization, as a machine is not blocked for a single product

b) The overhead costs are relatively low

c) Change in output design and volume can be more easily adapted to the output

of variety of products

d) Breakdown of one machine does not result in complete work stoppage

e) Supervision can be more effective and specialized

f) There is a greater flexibility of scope for expansion.

Disadvantages: Product layout suffers from following drawbacks

a. Material handling costs are high due to backtracking

b. More skilled labour is required resulting in higher cost.

c. Time gap or lag in production is higher

d. Work in progress inventory is high needing greater storage space

e. More frequent inspection is needed which results in costly supervision

Suitability: Process layout is adopted when

1. Products are not standardized

2. Quantity produced is small

3. There are frequent changes in design and style of product

4. Job shop type of work is done

5. Machines are very expensive

Thus, process layout or functional layout is suitable for job order production

involving non-repetitive processes and customer specifications and non standardized

products, e.g. tailoring, light and heavy engineering products, made

to order furniture industries, jewelry.

(c) Fixed Position or Location Layout

In this type of layout, the major product being produced is fixed at one location.

Equipment labour and components are moved to that location. All facilities are

brought and arranged around one work center. This type of layout is not relevant for small scale entrepreneur. 

Advantages: Fixed position layout provides the following benefits

a) It saves time and cost involved on the movement of work from one

workstation to another.

b) The layout is flexible as change in job design and operation sequence can be

easily incorporated.

c) It is more economical when several orders in different stages of progress are

being executed simultaneously.

d) Adjustments can be made to meet shortage of materials or absence of workers

by changing the sequence of operations.

Disadvantages: Fixed position layout has the following drawbacks

a. Production period being very long, capital investment is very heavy

b. Very large space is required for storage of material and equipment near the

product.

c. As several operations are often carried out simultaneously, there is possibility

of confusion and conflicts among different workgroups.

Suitability: The fixed position layout is followed in following conditions

1. Manufacture of bulky and heavy products such as locomotives, ships, boilers,

generators, wagon building, aircraft manufacturing, etc.

2. Construction of building, flyovers, dams.

3. Hospital, the medicines, doctors and nurses are taken to the patient (product).

(d) Combined layout

Certain manufacturing units may require all three processes namely intermittent

process (job shops), the continuous process (mass production shops) and the

representative process combined process [i.e. miscellaneous shops].

In most of industries, only a product layout or process layout or fixed location

layout does not exist. Thus, in manufacturing concerns where several products

are produced in repeated numbers with no likelihood of continuous production,

combined layout is followed. Generally, a combination of the product and

process layout or other combination are found, in practice, e.g. for industries

involving the fabrication of parts and assembly, fabrication tends to employ the

process layout, while the assembly areas often employ the product layout. In soap,

manufacturing plant, the machinery manufacturing soap is arranged on the

product line principle, but ancillary services such as heating, the manufacturing of

glycerin, the power house, the water treatment plant etc. are arranged on a

functional basis.

2. Traders

When two outlets carry almost same merchandise, customers usually buy in the

one that is more appealing to them. Thus, customers are attracted and kept by

good layout i.e. good lighting, attractive colours, good ventilation, air

conditioning, modern design and arrangement and even music. All of these things

mean customer convenience, customer appeal and greater business volume.

The customer is always impressed by service, efficiency and quality. Hence, the

layout is essential for handling merchandise, which is arranged as per the space

available and the type and magnitude of goods to be sold keeping in mind the

convenience of customers.

There are three kinds of layouts in retail operations today.

1. Self service or modified self service layout

2. Full service layout

3. Special layouts

The self-service layouts, cuts down on sales clerk's time and allow customers to

select merchandise for themselves. Customers should be led through the store in

a way that will expose them to as much display area as possible, e.g. Grocery

Stores or department stores. In those stores, necessities or convenience goods

should be placed at the rear of the store. The use of color and lighting is very

important to direct attention to interior displays and to make the most of the stores

layout.

Some layouts depend strictly on the type of special store to be set up, e.g. TV

repair shop, soft ice cream store, and drive-in soft drink stores are all examples of

business requiring special design. Thus, good retail layout should be the one,

which saves rent, time and labour.

3. Services centers and establishment

Services establishments such as motels, hotels, restaurants, must give due

attention to client convenience, quality of service, efficiency in delivering services

and pleasing office ambience. In today's environment, the clients look for ease in

approaching different departments of a service organization and hence the layout

should be designed in a fashion, which allows clients quick and convenient access

to the facilities offered by a service establishment.

FACTORS INFLUENCING LAYOUT

While deciding his factory or unit or establishment or store, a small-scale

businessman should keep the following factors in mind:

a) Factory building: The nature and size of the building determines the floor

space available for layout. While designing the special requirements, e.g. air

conditioning, dust control, humidity control etc. must be kept in mind.

b) Nature of product: product layout is suitable for uniform products whereas

process layout is more appropriate for custom-made products.

c) Production process: In assembly line industries, product layout is better. In

job order or intermittent manufacturing on the other hand, process layout is desirable.

d) Type of machinery: General purpose machines are often arranged as per

process layout while special purpose machines are arranged according to

product layout

e) Repairs and maintenance: machines should be so arranged that adequate

space is available between them for movement of equipment and people

required for repairing the machines.

f) Human needs: Adequate arrangement should be made for cloakroom,

washroom, lockers, drinking water, toilets and other employee facilities,

proper provision should be made for disposal of effluents, if any.

g) Plant environment: Heat, light, noise, ventilation and other aspects should be

duly considered, e.g. paint shops and plating section should be located in

another hall so that dangerous fumes can be removed through proper

ventilation etc. Adequate safety arrangement should also be made.

Thus, the layout should be conducive to health and safety of employees. It

should ensure free and efficient flow of men and materials. Future expansion and

diversification may also be considered while planning factory layout.

SYNOPSIS

Process layout similar equipment & tasks grouped; also called functional layout; useful for low volume, high variety jobs used when small batches of different products are created or worked on in a different operating sequence

CHARACTERISTICS OF PROCESS LAYOUTS

Low Volume, High Variety Production with Random Routing (Spaghetti-Like Flow)

General Purpose Machines--

Machine setups are frequent and long

Work-In-Process -- High

Throughput Rates tend to be Low

Material Handling -- High

Operator Utilization -- Low?

Throughput Times (Lead Time) -- High

System is Very Flexible, produces many different types of parts: gears, shafts, pinions, housings, clamps, etc.

Advantages

low capital investment,

fewer m/c;

higher space utilisation;

flexibility in equipment allocation;

workers gain expertise;

problems localised;

job variety

Disadvantages:

needs more space;

no mechanisation;

high wip;

work scheduling problems;

high set-up

inspection costs

PRODUCT LAYOUT

Equipment placed in usage sequence; also called line layout; useful in assembly work such as cars, m/cycle

The product layout (assembly line) is used when all products undergo the same operations in the same sequence

CHARACTERISTICS

High volume production

Special purpose machines and material handling equipment

Throughput rates--high

Work-in-process--low

Setup/Run time ratio--low

System is very inflexible

Control is relatively simple

Advantages

Small mfg cycle;

low wip;

min material handling;

lower labour cost;

effective quality control;

easy to schedule;

easy prodn control;

low variety

Disadvantages

Change in work nature needs change in layout;

m/c utilisation may not be optimum;

m/c breakdown delays work;

work area expansion/m/c addition not possible

PROJECT LAYOUT

Raw material placed in fixed positions; also called fixed position layout

Advantages

Reduces movement of m/c & equipment;

Minimizes damage/cost of movement;

continuity of assigned work force

Disadvantages:

Skilled & versatile workers needed due to multiple operations;

skill combination may be difficult to obtain;

higher pay;

Movement of people/material may be expensive;

equipment utilization low as they are left at location for subsequent usage instead of being moved as & where needed.