Microorganism Can Cause Food Poisoning Biology Essay

Published:

This essay has been submitted by a student. This is not an example of the work written by our professional essay writers.

Microorganism can cause food poisoning in different ways and one of the ways that can cause food cross contamination is entering the food through food contact surface. The survival of bacteria on food contact surfaces increases the risk of cross-contamination of these microorganisms to food (Cesare, et al, 2003). The risk has been considered to be lowered when the surfaces are dry because bacterial growth would be reduced. However, some non-spore-forming bacteria might be able to stand up the dry conditions on surfaces for a long period of time (Lindsay and Von Holy, 1999). Cleaning of food preparation surface is difficult because many microorganisms can adhere to these surfaces and may concentrate in places that remain moist (Kusumaningrum et al, 2003).

Microbiological risk assessment can be describes s a structured process that is used to determine the inherent risks associated with microbiological hazard be it physical, chemical or biological in food (Forsythe, 2007). Its goal is to characterize the likelihood as well as the nature of harm that results from human exposure to agents in food and uses both quantitative and qualitative data. In the microbiological risk assessment four distinct steps must be taken and these include hazard identification that involves the collection, organization and analysis or evaluation of data collected concerning a given pathogen (WHO, 2009). After identifying the hazard, it is characterized where the relationship between effects and the pathogen is identified. The third step is exposure analysis and assessment that is concerned with determining how much of a microbial has been ingested in a food serving (Brown, 2002). Lastly, microbiological risk assessment involves risk characterization that involves the evaluation of information related the risk. The aim of the microbial risk assessment is to provide useful and organized information for policy and decision makers to come up with interventions that can enhance the improvement of public health and minimize the occurrence of food borne diseases (WHO, 2009).

Food Cross Contamination

Have you ever suffered from food poisoning? A lot of people have experienced food poisoning in their lives but not yet successfully determined the causes. According to (Alfaro, 2012) the main causes of food poisoning is food cross contamination. This happens when bacteria or germs are spread from one food item to another from unwashed hands, surfaces knives, kitchen utensils and any other household items. The primary cause of food poisoning is food cross contamination. Identifying the causes is the only way to help in prevention of incidences of food poisoning. In nutshell this paper discusses how cross contamination occurs and the various strategies employed in preventing it.

Germs are very small disease carrying microorganisms that are not visible by the naked eye. This makes it hard for individuals to notice whether they are carrying them, there presence or when they have spread to the food. There are numerous ways that can lead to accumulation of germs ad bacteria; not washing hands after visiting the toilet, after changing the baby's nappies, after playing and handling any dirty equipment. Dirty households also harbor germs and bacteria and eating food that is not well prepared or fruits that are not washed. Preventing food cross contamination will ensure a good health since it will keep food poisoning at bay. This means that an individual will be healthy and able to carry out the day to day activities (Alfaro, 2012).

Preventing food cross contamination requires practicing food safety habits that are easy to learn and follow. Human negligence heavily influences the cause food poisoning, this is because a lot of people are very ignorant or are not aware of these very simple practices. Some of these practices should be followed when shopping, storing, preparing and serving food. According to (Minnesota Department of Health, 2012) they include:

Shopping food: The different food products or types should be separated when shopping. For instance, raw beef should be separated from the bread or milk packets.

Storing food: Foods like raw beef, sea foods and poultry should be refrigerated in plastic bags that can be sealed so as to prevent their raw juices, which carry bacteria, from dripping into other foods. Food like eggs should be refrigerated immediately after purchase.

Preparing food: A cook should ensure that he/ she prepares food in a vey clean environment so as to prevent the spread of germs and bacteria. The cook should first the cooking surface and utensils before preparing food then the hands. A clean cutting board and cutting utensils should be used when preparing the food to stop the spread of germs. If any food needs to be marinated, this should be done in the fridge but not in any cooking surface. All the vegetables and fruits need to washed and rinsed properly with enough water before cooking.

Serving food: Clean plates should be used when serving food. Cutting boards that had been used to cut raw meat should never be used for serving food as they may still be carrying germs and bacteria.

To successfully stop the spread of germs from one food item to another or surface, food should be handled properly from the point of buying, storing and preparing. The food needs to cleaned and rinsed properly before preparing plus the cook needs to clean his/her hands. The food should be cooked properly so as to kill the germs and bacteria present in the food (Minnesota Department of Health, 2012). This will ensure that any person that consumes the food is healthy and free from food poisoning.

Microbial Survival on Food Contact Surface

Microbial food poisoning causes a lot of suffering and financial loss all over the world. As a result of this it has become significantly important to identify the factors that increase the risk of food poisoning from harmful microbial (Kusumaningrum et. al, 2003). The question to bear in mind is how microbial survive in food contact surfaces such as stainless steel and other factors that affect this survival. This paper aims at understanding on the mechanisms of microbial adhesion on contact surfaces such as steel so as to come up with relevant and effective strategies for its control, and reduce the level of suffering on human being as well as financial losses incurred when seeking for treatment (Baranyi & Tamplin, 2004). This paper shows that there is a relationship between the characteristics of the microbial and environment surrounding them which affect their survival and multiplication on surfaces (Cohen, 2004).

The major source of potential harmful pathogens in the home environment as well as other food processing environments have been seen to the contaminated water, food, air, infected persons, pets and in some cases, insects  (Kusumaningrum et. al, 2003). Under conditions that are favorable such as temperature, relative humidity and pH, microbial are able to survive and in addition to this, replicate to a large extent (Cohen, 2004). This replication and survival increases the risk of contamination. In the kitchen food borne infection may arise as a result of incorrect food storage especially with respect to temperature conditions, poor or inadequate controlled cooking procedures and methods that may encourage the persistence of microbial in food stuffs, as well as contamination of both raw and cooked food prior to consumption (Kusumaningrum et. al, 2003). Contamination can also be passed on from kitchen equipment including utensils when contacting food. This often occurs in cases where these equipment, utensils as well as kitchen surfaces are not properly cleaned and sanitized before coming into contact with food (Cohen, 2004).

The ability of microbial to agree to food contact surfaces greatly compromises the hygienic levels of these very surfaces. If the hygienic standards are compromised such as cleaning kitchen surfaces and utensils with no soap and disinfectant will create a dirty environment that will encourage the growth and spread of the disease causing pathogens (Baranyi & Tamplin, 2004). Surface physiochemical characteristics of the pathogen and also the materials such as roughness and hydrophobicity are determinant during the very initial stages .The pathogenic adhesion to contact surfaces is also determined by the growth stage of the microbial as well as the nutrient availability in the surrounding medium, temperature and pH of the medium as has been mentioned before, ionic concentration as well as the cell strictures which is inclusive of Extracellular Polymeric Substances (EPS).

Roughness and hydrophobicity of contact surfaces can be easily altered. The rate of absorption of pathogens on surfaces differs from the material that the contact surface is made of. Research on the prevalence of microbial on surfaces has indicated that the higher the value of roughness, the greater the adhesion probability.  However, in the case of Listeria monocytogenes, however this is not entirely true. In other words, the pathogen's adhesion to a biotic contact surface is not directly and absolutely dependent o the substratum roughness and hydrophobicity (Cohen, 2004).

Retention of microbial on food contact surfaces such as stainless steel raises the chances of cross contamination of these microorganisms to food. When the surfaces are dry, the risk has been seen to be lower. Part explanation of this is that bacterial growth and survival would be reduced in dry environments. It is of significant importance to mention that there are some non-spore forming microbial that may withstand dry conditions on stainless steel surfaces, or any other container surface for that matter for extensive time periods (Baranyi & Tamplin, 2004).

Cells adherence to such container surfaces like steel are not easily removed by normal cleaning procedures (Kusumaningrum et. al, 2003). It is also of significant importance to mention that for impervious surfaces like glass, stainless steel, polystyrene and ceramic, the surface type does not have so much effect on the survival of the microbial, but the nature of the suspension fluid in which the cells are dried (Baranyi & Tamplin, 2004).

The significance of contaminated surfaces in reaction to potential transmission to microbial and pathogens to food substances is quite apparent in catering, food processing and domestic environments. Pathogen exposure on steel surfaces may occur either through direct contact with objects that are already contaminated or indirectly through airborne particles (Baranyi & Tamplin, 2004). Some microbial have been seen to have a tendency to attach themselves to surfaces as their primary form of survival in manmade ecosystems and nature. Examples of pathogens that are able to survive on sponges, clothes, hands, currency and utensils for hours or even days after the initial contact with the microorganism include Staphylococcus aureus, Escherichia coli, and Salmonella spp   (Kusumaningrum et. al, 2003).

The risk of food-borne contamination that leads to infection is often dependent upon two major factors which are the probability of its transfer to the food that people consume and secondly, the level of contamination on the surfaces such as stainless steel. Studies show that C. Jejuni, Staph aureus as well as S. enteritidis are able to remain viable on the surface of stainless steel containers for hours and in some cases, days on end (Cohen, 2004). Their degrees of survival in such circumstances heavily rely on their initial numbers. These pathogens would then be transferred from the containers (steel surfaces as well as other surfaces) to food substances that human beings consume. Such surfaces may include kitchen taps, refrigerators, kettles, blenders, knives and working surfaces. It has been found out that even after typical cleaning procedures have been undertaken contamination risks still remain, considering the fact that the pathogens have with time developed high resistant mechanisms and adaptive features that make them survive even in harsh environments (Kusumaningrum et. al, 2003).

There are factors that are responsible for the adhesion of microbial and other pathogenic bacteria in food environments (Cohen, 2004). Microbial are seen to display very high strain variability when it comes to adhesion ability to contact surfaces including steel. It is presumed that in addition to the physical characteristics of the medium in question, the microbial possess other intrinsic factors such as adhesions cell envelopes, extracellular polymers and cell wall proteins that come into play in the adhesion of these pathogens onto contact surfaces. In light of all this, there should be development of more effective disinfection strategies to improve the degree of hygiene in food processing and preparation environments to mitigate the risk of food contamination and food borne diseases (Baranyi & Tamplin, 2004).

Pathogenic bacteria survive on food contact surface

Salmonella spp.

Most of the Salmonella spp are pathogenic bacteria which can be classified as human pathogen. Foods can become contaminated with Salmonella spp when animal manure or human fecal material is used to fertilize the fields. There are more than 2,000 strains of Salmonella. All strains are pathogenic to humans but Salmonella enterica, serovars, Typhimurium and Enteritidis are the most type of Salmonella that associated with human illness (Jay, 1996). Salmonella spp is rod in shape, motile bacterium, Gram-negative enterobacteria, catalase positive and oxidase negative. The optimal growth of Salmonella spp. on or in food with a neutral pH of 6 to 7 and will multiply in food down occurs around pH 4.05. The raw meat and poultry, eggs and egg products, shellfish, processed meat, and dried milk and cheese made from unpasteurized milk have been common sources of this microorganism. The clinical poisoning symptoms of Salmonellosis are fever, diarrhoea, abdominal pain, nausea and sometimes vomiting. Symptoms usually begin about 6 to 48 hours after ingestion of the sufficient numbers of microorganisms (Adams and Moss, 2010).

Listeria monocytogenes

Listeria monocytogenes is typically a food-borne organism and it is the important human pathogen within the genus Listeria. Listeria monocytogenes are found widely bin the environment and can be isolated from soil, water and decaying vegetation. The common sources of this microorganism are dairy product such as raw and pasteurized milk and soft cheese (Adams and Moss, 2010). Listeria monocytogenes is a gram positive, nonsporeforming, oxidase negative, catalase positive, facultative anaerobic rod in shape which grows between - 0.4 and 50oC. These bacteria primarily cause listeriosis which manifestations found essentially among pregnant women, their fetuses, and immunocompromised persons, with symptoms of abortion, neonatal death, meningitis and septicaemia (Ryser and Marth, 1999).

Campylobacter spp

Campylobacter is well known as the most common reason of bacterial foodborne diarrheal disease all over the world. Campylobacter spp. is a non-spore forming, oxidase-positive, microaerophilic and Gram negative rods. These organisms are carried in the intestine of wild animals and poultry (Silva et al, 2011). Campylobacter species grows at 37°C, but not below 32°C. C. coli and C. jejuni are conveniently from other Campylobacter species by their high optimum growth temperature (42 - 45°C). Campylobacter species cannot survive in pasteurization and cooking temperature and also do not grow under temperature of 30°C (Padungton & Kaneene, 2003).

Bacillus cereus

Bacillus species are gram-positive, catalase positive, oxidase positive, rod-shaped and spore-formers that require oxygen. Bacillus cereus produces two types of intoxications and these toxins cause two types of foodborne. One type is characterized by nausea and vomiting and abdominal cramps and the other type is characterized by diarrheal and abdominal cramps (Bottone, 2010).

Staphylococcus aureus

Staphylococcus aureus is a Gram-positive coccus, facultative anaerobic, non-motile and catalase positive, coagulase positive and oxidase negative. Staphylococcus aureus is able to grow in a wide variety of foods because Staph aureus is able to grow in a wide range of temperature, pH and sodium chloride concentration. Staph aureus food poisoning is a leading cause of gastroenteritis that results from eating contaminated food with a toxin that produced by Staphylococcus aureus. Food poisoning symptoms that cause by this type of bacteria usually appears within 1 - 6 hours after consumption of contaminated food and this symptom may include nausea, diarrhea, vomiting and mild fever. Although, contamination of Staphylococcus aureus can be avoided by follow the proper way of personal hygiene while handling foods and refrigeration of raw and cooked foods (Loir et al, 2003).

Escherichia coli

Escherichia coli is the type species of the Enterobateriaceae family. Escherichia coli are a Gram negative non-sporing rod, oxidase negative and catalase positive. These types of bacteria live in human and animal intestines and most of the strains are harmless. E. Coli O157: H7 produces a toxin which causes the most food related illness in human (Adams and Moss, 2010). E. coli O157:H7 is mainly found in cows, sheep and chickens. However, food is at risk of becoming contaminated with E. coli through cross-contamination during slaughter or throughout the meat in the grinding process. The initial poisoning symptoms of Escherichia coli are abdominal pain, diarrhea and headaches (Pennington, 2010).

Indicator organisms (coliform)

Indicator organisms such as coliform are used in assessing food to determine quality. These types of organisms have been used to indicate the presence of the intestinal pathogens as a result of direct or indirect faecal contamination. A routine examination for pathogens and their toxins are necessary whenever epidemiological or other evidence indicate that occurrence of a particular agent in a specific type of food (Hayes, 1995). 

Swab processes

The swab method is the most processes are used for microbiological examination to detect the microbial that can survive of the food processing surface. Tests using swab method was carried out on surfaces contaminated with food born pathogen in food processing area and three types of surface were studied (stainless steel, marble, and wood), with adjacent areas being sampled before and after cleaning. All surfaces were prepared in sizes of 20 x 20 cm2 for survival experiments. The swabs were rotated while in contact with the food preparation surface. After the defined area is swabbed the swab is returned to the test tube that containing a suitable diluents to dislodge the bacteria. Serial dilutions of the swab solutions were cultured onto duplicate pour plates were prepared for each dilution using nutrient agar, and a 0.1 ml amount of the swab fluid was spread on MacConkey agar and Blood agar. The plates were incubated for 24 hours at 37oC.

Aim

The aim of this project is to identify the microbial that can survive in the food processing area such as stainless still, marble and wood even after the cleaning procedure which can cause food cross-contamination.

Objective

The objectives of this project were:

Assess the microbiological risks affecting food processing area.

Identify the presence of pathogenic microorganism in food processing area such as stainless still, marble and wood.

Evaluate the effect of the cleaning procedure on the microbial load in the food processing area.

Writing Services

Essay Writing
Service

Find out how the very best essay writing service can help you accomplish more and achieve higher marks today.

Assignment Writing Service

From complicated assignments to tricky tasks, our experts can tackle virtually any question thrown at them.

Dissertation Writing Service

A dissertation (also known as a thesis or research project) is probably the most important piece of work for any student! From full dissertations to individual chapters, we’re on hand to support you.

Coursework Writing Service

Our expert qualified writers can help you get your coursework right first time, every time.

Dissertation Proposal Service

The first step to completing a dissertation is to create a proposal that talks about what you wish to do. Our experts can design suitable methodologies - perfect to help you get started with a dissertation.

Report Writing
Service

Reports for any audience. Perfectly structured, professionally written, and tailored to suit your exact requirements.

Essay Skeleton Answer Service

If you’re just looking for some help to get started on an essay, our outline service provides you with a perfect essay plan.

Marking & Proofreading Service

Not sure if your work is hitting the mark? Struggling to get feedback from your lecturer? Our premium marking service was created just for you - get the feedback you deserve now.

Exam Revision
Service

Exams can be one of the most stressful experiences you’ll ever have! Revision is key, and we’re here to help. With custom created revision notes and exam answers, you’ll never feel underprepared again.